LittleFe:Startup

From Earlham CS Department
Revision as of 22:46, 20 May 2005 by Skylar (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Here's the procedure for starting up LittleFe:

  1. Open the box.
  2. Plug in the power and Ethernet cables for each node.
  3. Plug in the power strip to an outside power source and apply power.
  4. Wait about 15 seconds for the switch and WAP to stabilize.
  5. Turn on littlefe0 (the one with the handle).
  6. While littlefe0 is coming up, get your laptop on wireless and start trying to ping littlefe0 (192.168.10.100). [We should get average boot time for littlefe0.]
  7. Once littlefe0 is up, turn on all the other nodes. You can use ruptime on littlefe0 to see when the other nodes are ready.
Retrieved from "https://wiki.cs.earlham.edu/index.php?title=LittleFe:Startup&oldid=744"