Cs382/Plume Length Experiment

From Earlham CS Department
Revision as of 09:57, 5 November 2007 by Nate (talk | contribs) (→‎Procedure)
Jump to navigation Jump to search

This is a detailed description of one experiment listed on the CS382 course page

Goal

Equipment

  • enVision sand and gravel groundwater simulator
  • water soluble dye
  • pipette
  • water
  • ruler
  • kitchen timer or some other time measurement device

Procedure

  1. Mark ruler on outside of case
  2. Choose flow rate and dye amount
  3. Contaminate the confined aquifer
  4. Measure plume length at 10 second intervals

repeat with varied flow rate.

Results

Considerations for a Computer Based Simulation

Retrieved from "https://wiki.cs.earlham.edu/index.php?title=Cs382/Plume_Length_Experiment&oldid=3605"