Difference between revisions of "Energy Monitoring Hardware"

From Earlham CS Department
Jump to navigation Jump to search
m
 
(15 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
==Harvest Scripts ==
 
==Harvest Scripts ==
 +
These run on [[Proto]], generally.
  
 
There is a unique harvest script for every individual building, but the only differences between these scripts are the value of the ip number and the .
 
There is a unique harvest script for every individual building, but the only differences between these scripts are the value of the ip number and the .
Line 19: Line 20:
 
| Building
 
| Building
 
| Installed?
 
| Installed?
−
| EGX100 IP
+
| EGX100 Old IP
 +
| EGX100 New IP
 +
| New IP used?
 
| MAC Addr.
 
| MAC Addr.
 
| Directly off main switch?
 
| Directly off main switch?
Line 30: Line 33:
 
| Yes
 
| Yes
 
| 159.28.165.100
 
| 159.28.165.100
 +
| 159.28.16.100
 +
| Yes
 
| 00:80:67:82:99:34
 
| 00:80:67:82:99:34
 
| No
 
| No
Line 40: Line 45:
 
| Yes
 
| Yes
 
| 159.28.165.101
 
| 159.28.165.101
 +
| 159.28.16.101
 +
| Yes
 
| 00:80:67:82:99:2e
 
| 00:80:67:82:99:2e
 
| No
 
| No
Line 50: Line 57:
 
| Yes
 
| Yes
 
| 159.28.165.102
 
| 159.28.165.102
 +
| 159.28.16.102
 +
| Yes
 
| 00:80:67:82:99:32
 
| 00:80:67:82:99:32
 
| No
 
| No
Line 60: Line 69:
 
| Yes
 
| Yes
 
| 159.28.165.103
 
| 159.28.165.103
 +
| 159.28.16.103
 +
| Yes
 
| 00:80:67:82:99:38
 
| 00:80:67:82:99:38
 
| No
 
| No
Line 70: Line 81:
 
| Yes
 
| Yes
 
| 159.28.165.104
 
| 159.28.165.104
 +
| 159.28.16.104
 +
| Yes
 
| 00:80:67:82:99:2D
 
| 00:80:67:82:99:2D
 
| No
 
| No
Line 80: Line 93:
 
| Yes
 
| Yes
 
| 159.28.165.105
 
| 159.28.165.105
 +
| 159.28.16.105
 +
| Yes
 
| 00:80:67:82:99:3d
 
| 00:80:67:82:99:3d
 
| No
 
| No
Line 90: Line 105:
 
| Yes
 
| Yes
 
| 159.28.165.89
 
| 159.28.165.89
 +
| 159.28.16.89
 +
| Yes
 
| 00:80:67:82:99:29
 
| 00:80:67:82:99:29
 
| No
 
| No
Line 100: Line 117:
 
| No
 
| No
 
|  
 
|  
 +
|
 
|
 
|
 
| No
 
| No
 
|  
 
|  
 +
|
 
|
 
|
 
|
 
|
 
|
 
|
 
|-
 
|-
−
| <div style="color:red;">Wildman</div>
+
| Wildman(Now Noyes)
 
| No
 
| No
−
| 159.28.39.52
+
|
−
| 00:80:67:82:DC:CF
+
| 159.28.23.24
 +
| Yes
 +
| 00:80:67:82:DD:88
 
| No
 
| No
 
| 62.5
 
| 62.5
Line 120: Line 141:
 
| No
 
| No
 
|  
 
|  
 +
|
 +
|
 
|  
 
|  
 
| No
 
| No
Line 127: Line 150:
 
|
 
|
 
|-
 
|-
−
| <div style="color:red;">AWC</div>
+
| AWC
 
| No
 
| No
−
| 159.28.8.116
+
| 159.28.25.95
 +
| 159.28.25.95
 +
| Same IP
 
| 00:80:67:82:DD:6B
 
| 00:80:67:82:DD:6B
 
| No
 
| No
Line 140: Line 165:
 
| No
 
| No
 
|  
 
|  
 +
|
 +
|
 
|
 
|
 
| Yes
 
| Yes
Line 150: Line 177:
 
| Yes
 
| Yes
 
| 159.28.100.55 and 159.28.100.66
 
| 159.28.100.55 and 159.28.100.66
−
| 20BBC600A258 and 20BBC60113F3
+
| 159.28.26.33 and 159.28.26.36
 +
| Yes
 +
| 20:bb:c6:00:a2:58 and 20:bb:c6:01:13:f3
 
| No
 
| No
 
|  
 
|  
Line 160: Line 189:
 
| No
 
| No
 
|  
 
|  
 +
|
 +
|
 
|
 
|
 
| No
 
| No
Line 170: Line 201:
 
| No
 
| No
 
|  
 
|  
 +
|
 +
|
 
|
 
|
 
| No
 
| No
Line 180: Line 213:
 
| No
 
| No
 
|  
 
|  
 +
|
 +
|
 
|
 
|
 
| No
 
| No
Line 190: Line 225:
 
| No
 
| No
 
|  
 
|  
 +
|
 +
|
 
|
 
|
 
| Yes
 
| Yes
Line 200: Line 237:
 
| No
 
| No
 
|  
 
|  
 +
|
 +
|
 
|
 
|
 
| No
 
| No
Line 210: Line 249:
 
| Yes
 
| Yes
 
| 159.28.27.252
 
| 159.28.27.252
 +
| 159.28.27.252
 +
| Same IP
 
| 00:80:67:81:e9:cd
 
| 00:80:67:81:e9:cd
 
| No
 
| No
Line 220: Line 261:
 
| No
 
| No
 
|  
 
|  
 +
|
 +
|
 
|
 
|
 
| No
 
| No
 
| Unknown  
 
| Unknown  
 
| (Total Feed Size - Measured Feed Sizes)
 
| (Total Feed Size - Measured Feed Sizes)
 +
|
 +
|
 +
|-
 +
| Spare (Taken from Noyes)
 +
| No
 +
| 159.28.39.52
 +
| 159.28.23.24
 +
| Yes
 +
| 00:80:67:82:DC:CF
 +
| No
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
| Spare
 +
| No
 +
|
 +
| 159.28.25.95
 +
| Yes
 +
| 00:80:67:82:DD:77
 +
| No
 +
|
 +
|
 
|
 
|
 
|
 
|
Line 277: Line 344:
 
* The EGX100 Manual is also helpful to have on hand to decode the blinking lights.
 
* The EGX100 Manual is also helpful to have on hand to decode the blinking lights.
 
* The reset button on the EGX100 only power cycles the device, it does not actually clear any data according to the manual.
 
* The reset button on the EGX100 only power cycles the device, it does not actually clear any data according to the manual.
 +
* If the IP address is lost, visit https://www.schneider-electric.com/en/faqs/FA212273/
  
 
== Mounting an EGX100 for Installation in Building ==
 
== Mounting an EGX100 for Installation in Building ==
Line 301: Line 369:
 
* [[Media:EGX_100_installation.pdf| EGX100 Installation Guide]]
 
* [[Media:EGX_100_installation.pdf| EGX100 Installation Guide]]
 
* [[Media:EGX_100_userguide.pdf| EGX100 User Guide]]
 
* [[Media:EGX_100_userguide.pdf| EGX100 User Guide]]
 +
* [[Siemens Sentron Pac3200]]
 +
* [[PowerLogic PM800]]
 +
* [[Sepam Series 20]]

Latest revision as of 13:32, 28 November 2018

Harvest Scripts

These run on Proto, generally.

There is a unique harvest script for every individual building, but the only differences between these scripts are the value of the ip number and the . The harvest scripts are called by cron every minute.

Procedure for the Script

  • 0. Sets a timestamp.
  • 1. Sets a variable $pReal to the return value of java --cp with the following arguments:
    • filepath to the production directory
    • ModbusReadDemand
    • the ip number of the EGX100 of the building in question
    • the amperage correction of the building in question.

This return value represents electrical energy usage.

  • 2. Connects to the energy database.
  • 3. Inserts into the electrical_energy table (located within the energy database) a row for the energy usage of the building in question at the time of the timestamp.

Building Monitoring Data Table

Building Installed? EGX100 Old IP EGX100 New IP New IP used? MAC Addr. Directly off main switch? Amperage Correction Feed Size (Amps) Square Footage* Occupancy
Bundy Yes 159.28.165.100 159.28.16.100 Yes 00:80:67:82:99:34 No 31.25 800 50,012 165
Barrett Yes 159.28.165.101 159.28.16.101 Yes 00:80:67:82:99:2e No 15.625 1600 30,636 147
Wilson Yes 159.28.165.102 159.28.16.102 Yes 00:80:67:82:99:32 No 62.5 300/400 22,962 56
Warren Yes 159.28.165.103 159.28.16.103 Yes 00:80:67:82:99:38 No 62.5 300/400 22,962 56
Mills Yes 159.28.165.104 159.28.16.104 Yes 00:80:67:82:99:2D No 31.25 800 (bus bar) 132
OA Yes 159.28.165.105 159.28.16.105 Yes 00:80:67:82:99:3d No 31.25 800 26,703 122
Hoerner Yes 159.28.165.89 159.28.16.89 Yes 00:80:67:82:99:29 No 62.5 300/400 84
Carpenter No No
Wildman(Now Noyes) No 159.28.23.24 Yes 00:80:67:82:DD:88 No 62.5 300/400
Lilly No No 61,000
AWC No 159.28.25.95 159.28.25.95 Same IP 00:80:67:82:DD:6B No 31.25 800
Runyan No Yes
Stanley Yes 159.28.100.55 and 159.28.100.66 159.28.26.33 and 159.28.26.36 Yes 20:bb:c6:00:a2:58 and 20:bb:c6:01:13:f3 No
Dennis No No
Noyes No No
Tyler No No
LBC No Yes
Stout No No
Total Yes 159.28.27.252 159.28.27.252 Same IP 00:80:67:81:e9:cd No
Remainder No No Unknown (Total Feed Size - Measured Feed Sizes)
Spare (Taken from Noyes) No 159.28.39.52 159.28.23.24 Yes 00:80:67:82:DC:CF No
Spare No 159.28.25.95 Yes 00:80:67:82:DD:77 No

* : By Square Footage we mean the summed square footage of all the floors
Mills energy usage can be checked with: Total_of_the_U - (Warren + Wilson) = Mills

Correct EGX100 Dip Switch States

Pin Number 1 2 3 4 5 6
Up | Down Down UpUpUpUpUp

Siemens Sentron Pac3200

Siemens Sentron Pac3200

EGX100 and Voltage Regulator

The voltage regulator takes 110/220VAC and converts it to 24VDC for the EGX100.
The V- port on the voltage regulator connects to port #6 on the EGX100
The V+ port on the voltage regulator connects to port #7 on the EGX100


EGX100 and the Enercept Meter

A solid orange wire goes from port #3 on the EGX100 to the + port on the RS485 node of the Enercept meter.
A solid brown wire goes from port #4 on the EGX100 to the - port on the RS485 node of the Enercept meter.
A solid green wire goes from port #5 on the EGX100 to the shield port (S) on the RS485 node of the Enercept meter
A 100 Ohm resistor is placed between the + and - ports on connector that plugs into the Enercept meter.


Setting up an EGX100

Instructions

  1. Configure your computer's IP Manually. Set IP to 169.254.0.11 and subnet to 255.255.0.0. Apply these changes.
  2. Connect your computer to the 10/100 BASE TX port on the EGX100 with an ethernet cord.
  3. Type in the default IP address, 169.254.0.10, into a web browser, a password prompt should appear.
    If this does not work make sure you're on the correct subnet.
    If the EGX 100 is already configured (i.e. not the default configuration), be sure to be on the subnet 255.255.248.0 and assign your ip to the gateway ip 159.28.160.1
  4. Enter the default username is Administrator and the default password is Gateway
  5. Click on "Setup" in the top menu bar.
  6. Click "SNMP" on the sidebar
  7. Check the box "Enable SNMP" and configure the rest of the settings: contact information to "Charlie Peck," set system name and system location appropriately.
  8. Click the "Apply" button to apply changes.
  9. Click on "Ethernet & TCP/IP" in the sidebar
  10. Configure the TCP/IP information here.
    IP address for the EGX is in the table above, gateway is 159.28.160.1, subnet is 255.255.248.0
  11. Click "Apply" the device will essentially reboot and you will have to log back in to make any more changes. Login through the new device gateway and subnet to make sure changes stuck.
  12. Log out of the EGX.
    That's it the device is configured and good to go.

Notes:

  • This is easiest if your computer's wifi is off.
  • Troubleshooting with Wireshark and the ping command will reveal a lot if you make a typo in one of the fields.
  • The EGX100 Manual is also helpful to have on hand to decode the blinking lights.
  • The reset button on the EGX100 only power cycles the device, it does not actually clear any data according to the manual.
  • If the IP address is lost, visit https://www.schneider-electric.com/en/faqs/FA212273/

Mounting an EGX100 for Installation in Building

  1. Cut a length of din rail sufficient to mount an EGX100 and its power supply. 13 cm is sufficient.
  2. Place the rail so that its center is as close to the box's center as possible. Mark holes at the rail hole locations and drill holes into plastic box at those locations.
  3. Turn the screws into the holes to secure the rail onto the box.
  4. BEFORE placing the EGX100 or power supply in the box, drill three holes into the box to provide access points to the power input, the wires coming from the magnet, and the top ethernet port (labeled 10/100 Base Tx). Choose the location of the holes so that wires running through them will take a short path to their ports. Because the hole will be used as space for a conduit screw (see photo documentation), select a drill bit that is appropriate for the diameter of the screw. See photo 3 for an example.
  5. Turn a conduit screw (see photo documentation) into each hole in the box. This conduit will give passage to all necessary I/O.
  6. The EGX100 and power supply have clips on their undersides designed to fix onto the din rail. With the clip open, place the EGX100 and power supply onto the din rail. Then, click it closed.

Coloring Conventions for Wires Connecting EGX100 to Enercept Meters

Building Color for + Color for - Color for Shield
Wildman Black White Red
Hoerner Orange Brown Green
AWC Orange Brown Green

Documentation

Retrieved from "https://wiki.cs.earlham.edu/index.php?title=Energy_Monitoring_Hardware&oldid=16934"