Difference between revisions of "Post-install.pl stops"

From Earlham CS Department
Jump to navigation Jump to search
(No difference)

Revision as of 13:35, 19 June 2007

Enter your NIS domain <default : public.cs.earlham.edu > <ok>


  • Configuring ifhp

Location of filters has changed.

The location of the filters has changed from /usr/lib/filters to /usr/lib/ifhp so as to comply with Debian policy (FHS-2.2 sec 4.7)

Please modify your printcap file to reflect the new path to ifhp:/usr/lib/ifhp/ifhp

		<ok>
  • Configuring isdnlog

Entering isdnlog configuration

For correct isdnlog functioning, isdnlog needs to be configured with a number of settings. These ae some or all (depending on the level you have configured debconf with) of:

 - country		this is used for setting a number of defaults, e.g. 				what rate tables to use for calculating the cost of 				a call
 - country prefix    	what is used to indicate an international number
 - country code	the phone number for your country (eg 49 for Germany)
 - areacode prefix	what is used to indicate an areacode, if applicable 	
 - area do

After installation, you may have to edit /etc/isdn/isdnlog.isdnctrl0 before isdnlog can work properly, although that file is set up with reasonable defaults for most cases.

If you previously had /etc/isdn/isdnlog.isdnctrl0, that will be preserved

<ok>

  • Configuring ipppd
  • Configuring isdnvboxserver
  • Configuring krb5-config
  • Configuring libnss-ldap * 6

/usr/share/xsession/vtwm.desktop: No such file or directory

Done