Difference between revisions of "Power down before outages"
Jump to navigation
Jump to search
m |
|||
| Line 22: | Line 22: | ||
* Apcupsd: need some more info to actually connect to the UPS, but the software runs on shinken | * Apcupsd: need some more info to actually connect to the UPS, but the software runs on shinken | ||
| − | '''Date Last Updated:''' August 1, 2018 | + | '''Helpful sources''' |
| + | * https://wiki.debian.org/apcupsd | ||
| + | * http://www.apcupsd.org/manual/manual.html | ||
| + | |||
| + | ''Date Last Updated:''' August 1, 2018 | ||
---- | ---- | ||
[[Category:Open Tasks]] | [[Category:Open Tasks]] | ||
Revision as of 23:43, 21 October 2018
Name of Task: Power down before outages
People Involved: Craig Earley
Date Started: June 5, 2018 (or thereabouts)
Deadline:
Description:
After a hard crash in June 2018, we want to have a program that powers down our servers gracefully after we switch to battery power. The program APCUPSD should be helpful.
Status
APCUPSD is installed and works. It does not yet interface with our hardware.
We have useful SNMP codes as well, which can be helpful in getting information.
Some notes scraped from a Google Drive Doc:
- Decided we’ll use the current UPS info and adapt later if needed
- Send message to ask machines to initiate shutdown
- Apcupsd: need some more info to actually connect to the UPS, but the software runs on shinken
Helpful sources
Date Last Updated:' August 1, 2018
