Difference between revisions of "HIP:TS-7000:DHCP Problems"
Jump to navigation
Jump to search
(→Trying to boot from board?) |
(→Trying to boot from network?) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
DEVICE=eth0 | DEVICE=eth0 | ||
| − | IPADDR=192.168.0. | + | #IPADDR=192.168.0.# |
| − | NETMASK=255.255.255.0 | + | #NETMASK=255.255.255.0 |
| − | NETWORK=192.168.0.0 | + | #NETWORK=192.168.0.0 |
| − | BROADCAST=192.168.0.255 | + | #BROADCAST=192.168.0.255 |
| − | + | BOOTPROTO=static | |
| − | BOOTPROTO=dhcp | + | #BOOTPROTO=dhcp |
ENABLE=yes | ENABLE=yes | ||
| Line 32: | Line 32: | ||
GATEWAY=192.168.0.1 | GATEWAY=192.168.0.1 | ||
GW_DEV=eth0 | GW_DEV=eth0 | ||
| − | HOSTNAME=" | + | HOSTNAME="hostname" |
#BOOTPROTO=static | #BOOTPROTO=static | ||
BOOTPROTO=dhcp | BOOTPROTO=dhcp | ||
| Line 69: | Line 69: | ||
GATEWAY=192.168.0.1 | GATEWAY=192.168.0.1 | ||
GW_DEV=eth0 | GW_DEV=eth0 | ||
| − | HOSTNAME=" | + | HOSTNAME="hostname" |
#BOOTPROTO=static | #BOOTPROTO=static | ||
BOOTPROTO=dhcp | BOOTPROTO=dhcp | ||
DEFRAG_IPV4=no | DEFRAG_IPV4=no | ||
FORWARD_IPV4=no | FORWARD_IPV4=no | ||
Latest revision as of 15:30, 3 April 2008
Trying to boot from network?
- Make sure the files in /etc/sysconfig look similar to the ones below;
- filename: ifcfg-eth0
DEVICE=eth0 #IPADDR=192.168.0.# #NETMASK=255.255.255.0 #NETWORK=192.168.0.0 #BROADCAST=192.168.0.255 BOOTPROTO=static #BOOTPROTO=dhcp ENABLE=yes
- filename: ifcfg-lo
DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static
- filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
NETWORKING=yes
GATEWAY=192.168.0.1
GW_DEV=eth0
HOSTNAME="hostname"
#BOOTPROTO=static
BOOTPROTO=dhcp
DEFRAG_IPV4=no
FORWARD_IPV4=no
Trying to boot from board?
- filename: ifcfg-eth0
DEVICE=eth0 IPADDR=192.168.0.# NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 #BOOTPROTO=static BOOTPROTO=dhcp ENABLE=yes
- filename: ifcfg-lo
DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static
- filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
NETWORKING=yes
GATEWAY=192.168.0.1
GW_DEV=eth0
HOSTNAME="hostname"
#BOOTPROTO=static
BOOTPROTO=dhcp
DEFRAG_IPV4=no
FORWARD_IPV4=no
