Difference between revisions of "HIP:TS-7000:DHCP Problems"
Jump to navigation
Jump to search
(→Trying to boot from network?) |
|||
| Line 16: | Line 16: | ||
* filename: ifcfg-lo | * filename: ifcfg-lo | ||
| − | DEVICE=lo | + | DEVICE=lo |
| − | IPADDR=127.0.0.1 | + | IPADDR=127.0.0.1 |
| − | NETMASK=255.0.0.0 | + | NETMASK=255.0.0.0 |
| − | NETWORK=127.0.0.0 | + | NETWORK=127.0.0.0 |
| − | BROADCAST=127.255.255.255 | + | BROADCAST=127.255.255.255 |
| − | ENABLE=yes | + | ENABLE=yes |
| − | BOOTPROTO=static | + | BOOTPROTO=static |
* filename: network_cfg | * filename: network_cfg | ||
| − | ### Technologic Systems | + | ### Technologic Systems |
| − | ### General Network Configuration File | + | ### General Network Configuration File |
| − | ### | + | ### |
NETWORKING=yes | NETWORKING=yes | ||
GATEWAY=192.168.0.1 | GATEWAY=192.168.0.1 | ||
| Line 37: | Line 37: | ||
DEFRAG_IPV4=no | DEFRAG_IPV4=no | ||
FORWARD_IPV4=no | FORWARD_IPV4=no | ||
| − | |||
| − | |||
| − | |||
| − | |||
== Trying to boot from board? == | == Trying to boot from board? == | ||
Revision as of 15:20, 3 April 2008
Trying to boot from network?
- Make sure the files in /etc/sysconfig look similar to the ones below;
- filename: ifcfg-eth0
DEVICE=eth0 IPADDR=192.168.0.03 NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 #BOOTPROTO=static BOOTPROTO=dhcp ENABLE=yes
- filename: ifcfg-lo
DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static
- filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
NETWORKING=yes
GATEWAY=192.168.0.1
GW_DEV=eth0
HOSTNAME="pmp3"
#BOOTPROTO=static
BOOTPROTO=dhcp
DEFRAG_IPV4=no
FORWARD_IPV4=no
