Miller-wind-design
Wind Genny at Miller Farm
Layout
http://img.photobucket.com/albums/v24/psuedofiddle/gennylayout.png
Shopping List
1. 130 foot 6AWG NMC power cable and conduit
for some reason, I haven't found reliable price lists on these. Maybe a trip to Lowe's is in order.
2. Duplicates of the Dennis Outback equipment
PDFs are here: http://www.outbackpower.com/pdfs/spec_sheets/flexmax.pdf http://www.outbackpower.com/pdfs/manuals/flexmax.pdf http://www.outbackpower.com/pdfs/manuals/gtfx_gvfx.pdf Prices here: http://www.outbackpower.com/pdfs/price_list.pdf
unfortunately it seems that the flexmax charge controllers are designed for solar arrays and are not compatible with a wind source. Here's why: http://www.tlgwindpower.com/ccontrollerinfo.htm Granted the risk of blowing out a charge controller on our genny would probably not be of grave concern (it would take 50mph winds to get our genny to do above 7 amps on a 24VDC system), do we still take the risk given that the warranty and service won't cover it? MacroWind sells inverters and controllers that are compatible it seems with solar PV input. http://www.macro-wind.com/controller.htm Randy from Third Sun thinks this to be the simplest way to handle our problem, however he did mention that using a step up converter, integrating wind into the system we have in Dennis is possible so perhaps it would be with the Farm.
3. circuit box and fuses.
we already have an outdoor circuit box with extra space inside. Depending on what it's already connected to we could hijack it for alternative purposes
more research results coming including prices.
