HIP:TS-7000:DHCP Problems

From Earlham CS Department
Revision as of 14:22, 3 April 2008 by Madunnh (talk | contribs) (→‎Trying to boot from network?)
Jump to navigation Jump to search

Trying to boot from network?

  • Make sure the files in /etc/sysconfig look similar to the ones below;
  • filename: ifcfg-eth0
DEVICE=eth0
IPADDR=192.168.0.#
NETMASK=255.255.255.0
NETWORK=192.168.0.0
BROADCAST=192.168.0.255
#BOOTPROTO=static
BOOTPROTO=dhcp
ENABLE=yes
  • filename: ifcfg-lo
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
ENABLE=yes
BOOTPROTO=static
  • filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
       NETWORKING=yes
       GATEWAY=192.168.0.1
       GW_DEV=eth0
       HOSTNAME="pmp#"
       #BOOTPROTO=static
       BOOTPROTO=dhcp
       DEFRAG_IPV4=no
       FORWARD_IPV4=no

Trying to boot from board?

  • filename: ifcfg-eth0
DEVICE=eth0
IPADDR=192.168.0.#
NETMASK=255.255.255.0
NETWORK=192.168.0.0
BROADCAST=192.168.0.255
#BOOTPROTO=static
BOOTPROTO=dhcp
ENABLE=yes
  • filename: ifcfg-lo
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
ENABLE=yes
BOOTPROTO=static
  • filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
       NETWORKING=yes
       GATEWAY=192.168.0.1
       GW_DEV=eth0
       HOSTNAME="pmp#"
       #BOOTPROTO=static
       BOOTPROTO=dhcp
       DEFRAG_IPV4=no
       FORWARD_IPV4=no
Retrieved from "https://wiki.cs.earlham.edu/index.php?title=HIP:TS-7000:DHCP_Problems&oldid=3899"