HIP:YSI-650MDS

• How to connect sonde and GPS to 650.

• • To communicate with GPS:
    • 1. In GPS menu, highlight SETUP -> INTERFACE
    • 2. Set I/O FORMAT: NMEA OUT

• How to calibrate sonde using 650 unit?
  • (Example of pH)
  • 1. Connecting 650 to sonde, highlight Sonde menu -> Calibrate -> ISE1 pH -> 1-point
  • 2. Immerse the sonde in a buffer of known pH value and press Enter
  • 3. Input the proper pH value for your calibration temperature, and press Enter

• How to harvest data?
  • Run sonde from 650.
    • 1. In 650 main menu, highlight Sonde run -> (under 650) start logging
    • 2. Enter a file name and site description
    • 3. 650 starts logging
    • 4. When the study is complete, highlight the Stop logging selection and press Enter
    • NOTE: You have to log the data to 650 memory, not to sonde memory, because GPS and barometer data cannot be logged to sonde memory.

• How to update data on PC?
  • 1. Connect 650 to stewie in HIP account.
  • 2. Run EcoWatch, click on the sonde icon in the upper tool bar, and set the Comm port number to match your interface.
  • 3. Highlight the Upload to PC selection in the 650 File menu and press Enter to view a list of the files. Highlight the file that you wish to transfer and press Enter.

• How to convert dat file to csv file?
  • 1. Open dat file you uploaded on EcoWatch.
  • 2. Set parameter of the dat file.
    • Graphical example of setting parameter
      • Open file
      • Choose Setup->Parameter->Add/Remove
      • Select parameter
      • Display data
  • 3. Choose File->Export->CDF/WMF