ShutdownProcedure

From Earlham CS Department
Revision as of 13:58, 9 May 2017 by Ptranh14 (talk | contribs) (order of shutdowns)
Jump to navigation Jump to search

These are the shutdown and boot up instructions for CS and Cluster servers.

Originally published: 2017-04-18


General Info

  • babbage should be the very last machine brought down
  • to get to sysadmin@control first ssh into home or hopper.
  • Make sure all virtual machines are shut down before restarting the bare metal hardware

CS virtual machies

The different VMs mount from eachother, so just be patient and everything hopefully will work out.

Tools

We may have to restart nginx, jupyter, and sage by hand. Using history | grep <command> is helpful here. (make sure to grab the entire command including ampersand)

Jupyter

eccs-tools# nohup su -c "/mnt/lovelace/software/anaconda/envs/py35/bin/jupyterhub -f /etc/jupyterhub/jupyterhub_config.py --no-ssl" &

Sage

eccs-tools# nohup /home/sage/sage-6.8/sage --notebook=sagenb accounts=False automatic_login=False interface= port=8080 &

Cluster

order of shutdowns

  1. all compute nodes: (layout, alsalam, whedon) and t-voc, bigfe, elwood
  2. all head nodes: (layout, alsalam, whedon)
  3. pollock
  4. bronte + disk array
  5. wait until everything up to this point has shutdown
  6. dali
  7. kahlo
  8. wait until everything up to this point has shutdown
  9. hopper

order to bring up

The reverse of shutdown, again make sure to wait before proceeding at the appropriate steps.

CS

order of shutdowns

If hopper is back online, ssh sysadmin@cluster.cs.earlham.edu and then ssh sysadmin@control.cs.earlham.edu. This way we can shutdown all the VMs directly without being knocked off line or being in the machine room.

Example for shutting down a machine on control.

ssh admin@home.cs.earlham.edu
ssh sysadmin@control.cs.earlham.edu
sudo su -
control-# xm destroy <hostname>.cs.earlham.edu

List running VMs

control-# xm list
  1. proto (lives seperatly, ssh admin@proto.cs.earlham.edu)
  2. murphy ( ssh admin@home.cs.earlham.edu then ssh admin@murphy.cs.earlham.edu)
  3. tools
  4. web
  5. home
  6. net
  7. control (where xen runs net, home, web, tools as VMs)
  8. babbage (firewall)

order of bring up

Bring up control first.

  • Make sure all virtual machines are shut down before restarting the bare metal hardware*

Mounting Logical Volumes

When you reboot, the LVM volume groups and logical volumes may not be automatically enabled. To bring them back do

console-# vgchange -a y

This should be done at boot using /etc/init.d/rc.sysinit but there still might be some subtleties there.

And then check the status of the volumes with

console-# vgscan
console-# lvscan

You can use vgchange -a y <volume group name> to enable volume groups and lvchange -a y <logical volume name> to enable logical volumes.

If it's an issue, you'll need to enable the vmstore-shared volume group as well as any logical volumes in there.

Starting VMs

The VMs on control should be brought up in the reverse order they were shutdown. It is very important to bring up net first.

control-# xm create -c /mnt/vmdata-shared/config/eccs-<hostname>.cfg
# To exit to the hypervisor shell you can press Ctrl + ]
# To start VM without going into console for boot messages, forego the -c

The configuration files used for starting the virtual machines are in /mnt/vmdata-shared/config/. There are 4: eccs-home.cfg, eccs-web.cfg, eccs-net.cfg, and eccs-tools.cfg. There are backup copies in ~sysadmin/xen-configs.

Connect to VM console

console-# xm console <hostname>.cs.earlham.edu

You'll need to make sure that their DNS resolver settings are correctly set. I've had trouble with them using the incorrect DNS server settings sometimes and I'm not sure if the issues are resolved or not.

-Eamon