Siemens Sentron Pac3200

From Earlham CS Department
Revision as of 14:13, 29 March 2015 by Ghcrows13 (talk | contribs) (Stanley Lights / Outlets (120w))
Jump to navigation Jump to search

Installations

Two are in use in Stanley Hall in room "041 Field Ecology" (SCHLAGE-keyed locks) and subroom "801A Electrical" with the same type of lock.

Stanley Lights / Outlets (120w)

  • It's the top one.
  • MAC: 20-BB-C6-01-13-F3
  • IP: 159.28.100.66
  • HOST: power-mon-100066
  • Ethernet port: 097

Stanley Industrial (440w)

  • It's the bottom one.
  • MAC: 20-BB-C6-00-A2-58
  • IP: 159.28.100.55
  • HOST: power-mon-100055
  • Ethernet port: 098

Software Installation

  1. Download and install Powerconfig from this awful Seimens website
  2. right click the project and add a PAC3200
  3. under parameters, do the following:
    • change the IP address to one of the IPs above
    • change the Gateway to 159.128.100.1
    • set Protocol to Modbus TCP
  4. in the menu click Options -> Activate Online View
  5. in the menu click Views -> Measurement/Voltage/Current/Power

Resources

manual

datasheet

modbus registers

Powerconfig v3.2


Modbus