Siemens Sentron Pac3200

Installations

Two are in use in Stanley Hall in room "041 Field Ecology" (SCHLAGE-keyed locks) and subroom "801A Electrical" with the same type of lock.

Stanley Lights / Outlets (120w)

• It's top one.
• MAC: 20-BB-C6-01-13-F3
• IP: 159.28.100.66
• HOST: power-mon-100066
• Ethernet port: 097

Stanley Industrial (440w)

• It's the bottom one.

• MAC: 20-BB-C6-00-A2-58
• IP: 159.28.100.55
• HOST: power-mon-100055
• Ethernet port: 098

Software Installation

1. Download and install Powerconfig from this awful Seimens website
2. right click the project and add a PAC3200
3. under parameters, do the following:
   • change the IP address to one of the IPs above
   • change the Gateway to 159.128.100.1
   • set Protocol to Modbus TCP
4. in the menu click Options -> Activate Online View
5. in the menu click Views -> Measurement/Voltage/Current/Power

Resources

manual

datasheet

modbus registers

Powerconfig v3.2

Modbus