Difference between revisions of "Wind Poster"

From Earlham CS Department
Jump to navigation Jump to search
 
Line 2: Line 2:
 
* Wind turbines turn by a combination of lift and drag, very similarly as airplane wings.  When the wind passes over the blade it creates a localized low pressure area behind the blade. The blade is then pulled into this area.  This is called lift. The push of the wind on the blade is drag. The force of lift is significantly stronger than that of drag. The combination of lift and drag cause the rotor to turn and turns a drive shaft. The drive shaft in turn, turns the generator, creating electricity.  
 
* Wind turbines turn by a combination of lift and drag, very similarly as airplane wings.  When the wind passes over the blade it creates a localized low pressure area behind the blade. The blade is then pulled into this area.  This is called lift. The push of the wind on the blade is drag. The force of lift is significantly stronger than that of drag. The combination of lift and drag cause the rotor to turn and turns a drive shaft. The drive shaft in turn, turns the generator, creating electricity.  
 
* HAWT vs. VAWT
 
* HAWT vs. VAWT
−
** Horizontal Axis Wind Turbines, or HAWTs, make up 95% of all wind machines in the world. The blades look like airplane propellers. There can be 1, 2, or 3 blades on a tower. Most commonplace are 2 or 3 blades because the blades balance each other and minimize torque.
+
** Horizontal Axis Wind Turbines, or HAWTs, make up 95% of all wind machines in the world. The blades look like airplane propellers and one, two, or three blades are generally located per tower. Most commonplace are 2 or 3 blades because the blades balance each other and minimize torque.
 
** Vertical Axis Wind Turbines, VAWT, have much higher strain on rotors because of the guy wires needed to keep it erect. They also can't be placed on higher towers to take advantage of the more stable winds. There are different styles of VAWT, but all experience the same problems.  
 
** Vertical Axis Wind Turbines, VAWT, have much higher strain on rotors because of the guy wires needed to keep it erect. They also can't be placed on higher towers to take advantage of the more stable winds. There are different styles of VAWT, but all experience the same problems.  
 
*** VAWT picture -- http://www.memagazine.org/backissues/jun04/features/apptowind/30topc.jpg                HAWT picture -- http://www.bergey.com/images/Excel.CEC.jpg
 
*** VAWT picture -- http://www.memagazine.org/backissues/jun04/features/apptowind/30topc.jpg                HAWT picture -- http://www.bergey.com/images/Excel.CEC.jpg
 
* Wind Prospecting
 
* Wind Prospecting
−
** Before a wind farm is set up, prospecting must be done. Anemometers are set up to determine the average wind speed.  For a wind turbine to be practice, the general consensus is the average wind speed is greater than 12 mph.  
+
** Before a wind farm is set up, prospecting must be done. Anemometers, a device to determine wind speed, are set up to determine the average wind speed.  For a wind turbine to be practice, the general consensus is the average wind speed is greater than 12 mph.  
  
 
Power
 
Power
−
* Power available works as a CUBE of the amount of wind present.  In general a site needs to have average wind speeds of over 5m/s (11mph) for cost effective generation.  Stronger less turbulent wind is 30 m above the ground and higher. A single 750-kilowatt (kW) wind turbine, typical of those now being installed in power plants around the world, produces roughly 2 million kilowatt-hours (kWh) of electricity annually
+
* Power available works as a CUBE of the amount of wind present.  In general, a site needs to have average wind speeds of over 5m/s (11mph) for cost effective generation.  Stronger less turbulent wind is 30 m above the ground and higher. A single 750-kilowatt (kW) wind turbine, typical of those now being installed in power plants around the world, produces roughly 2 million kilowatt-hours (kWh) of electricity annually
  
 
Environmental Impact
 
Environmental Impact
Line 15: Line 15:
 
** Based on the U.S. average fuel mix, approximately 1.5 pounds of CO2 is emitted for every kW generated. Post production, a wind turbine does not emit CO2.  A 750 watt wind turbine can prevent the production of CO2  from other power plants that 500 acres of forest can absorb. On average, 300 American homes can be powered by a 1kW turbine.  
 
** Based on the U.S. average fuel mix, approximately 1.5 pounds of CO2 is emitted for every kW generated. Post production, a wind turbine does not emit CO2.  A 750 watt wind turbine can prevent the production of CO2  from other power plants that 500 acres of forest can absorb. On average, 300 American homes can be powered by a 1kW turbine.  
 
* Noise
 
* Noise
−
** At a distance of 700-1000 ft, an operating wind farm is no louder than the hum of a refrigerator or a moderately quiet room.
+
** At a distance of 700-1000 ft, an operating wind farm is no louder than the hum of a refrigerator or a moderately quiet room. Small turbines generally create more noise than the larger ones, because they have a higher rotational speed of the tip.  More research money has been devoted to decreasing the noise in larger turbines than in smaller turbines.
 +
 
 
{| border="1"
 
{| border="1"
 
| Rural night-time background|| 20-40 dB
 
| Rural night-time background|| 20-40 dB
Line 27: Line 28:
 
| Jet aircraft at 250m|| 105 dB
 
| Jet aircraft at 250m|| 105 dB
 
|}
 
|}
−
** Small turbines generally create more noise than the larger ones, because they have a higher rotational speed of the tip.  More research money has been devoted to decreasing the noise in larger turbines than in smaller turbines.
+
db - decibel
 +
 
  
 
* Bird and Bats
 
* Bird and Bats
−
** The National Audubon Society (NAS) has recently issued a statement that wind turbines are less harmful to bird populations than cars, planes, and other man-made contributions. NAS has supported the development of wind energy. According to research in the U.S. And Denmark, the leading country in wind energy production, power lines pose a higher threat to birds than wind turbines.  Deaths caused by wind towers and turbines are on the individual level, not the population.  Places with high mortality rates are routinely  investigated.  
+
** The National Audubon Society (NAS) has recently issued a statement that wind turbines are less harmful to bird populations than cars, planes, and other man-made contributions. NAS recently supported the development of responsibly located wind turbines for energy production. According to research in the U.S. And Denmark, the leading country in wind energy production, power lines pose a higher threat to birds than wind turbines.  Deaths caused by wind towers and turbines are on the individual level, not population.  Places with high mortality rates are routinely  investigated.  
 
Newer technology has lowered the mortality rate to bats and birds. The single tower instead of a lattice support or guy wires makes collisions with the pole itself less of an issue in HAWTs. Blades are not required to spin as fast as they were twenty years ago and towers spaced farther apart to lower the risk to the avian population.  
 
Newer technology has lowered the mortality rate to bats and birds. The single tower instead of a lattice support or guy wires makes collisions with the pole itself less of an issue in HAWTs. Blades are not required to spin as fast as they were twenty years ago and towers spaced farther apart to lower the risk to the avian population.  
  
Line 70: Line 72:
  
 
* Background
 
* Background
−
** The earliest known wind turbine is from Persia, the area now known as Iraq. These were of the vertical axis design. Centuries later, Holland perfected the art of harvesting wind with propeller blades on a rotating axis to face the wind.  
+
** The earliest known wind turbine is from Persia, the area now known as Iraq, and were of the vertical axis design. Centuries later, Holland perfected the art of harvesting wind with propeller blades on a rotating axis to face the wind.  
 
** Windmills are primarily used to gather water or grind grain. Turbines (or modern windmills) are used to harvest electricity. Early grain grinders were straight forward, with the grinding stone attached to the vertical shaft of the windmill.
 
** Windmills are primarily used to gather water or grind grain. Turbines (or modern windmills) are used to harvest electricity. Early grain grinders were straight forward, with the grinding stone attached to the vertical shaft of the windmill.
  

Latest revision as of 13:28, 12 August 2005

Highlights

  • Wind turbines turn by a combination of lift and drag, very similarly as airplane wings. When the wind passes over the blade it creates a localized low pressure area behind the blade. The blade is then pulled into this area. This is called lift. The push of the wind on the blade is drag. The force of lift is significantly stronger than that of drag. The combination of lift and drag cause the rotor to turn and turns a drive shaft. The drive shaft in turn, turns the generator, creating electricity.
  • HAWT vs. VAWT
    • Horizontal Axis Wind Turbines, or HAWTs, make up 95% of all wind machines in the world. The blades look like airplane propellers and one, two, or three blades are generally located per tower. Most commonplace are 2 or 3 blades because the blades balance each other and minimize torque.
    • Vertical Axis Wind Turbines, VAWT, have much higher strain on rotors because of the guy wires needed to keep it erect. They also can't be placed on higher towers to take advantage of the more stable winds. There are different styles of VAWT, but all experience the same problems.
  • Wind Prospecting
    • Before a wind farm is set up, prospecting must be done. Anemometers, a device to determine wind speed, are set up to determine the average wind speed. For a wind turbine to be practice, the general consensus is the average wind speed is greater than 12 mph.

Power

  • Power available works as a CUBE of the amount of wind present. In general, a site needs to have average wind speeds of over 5m/s (11mph) for cost effective generation. Stronger less turbulent wind is 30 m above the ground and higher. A single 750-kilowatt (kW) wind turbine, typical of those now being installed in power plants around the world, produces roughly 2 million kilowatt-hours (kWh) of electricity annually

Environmental Impact

  • Pollution
    • Based on the U.S. average fuel mix, approximately 1.5 pounds of CO2 is emitted for every kW generated. Post production, a wind turbine does not emit CO2. A 750 watt wind turbine can prevent the production of CO2 from other power plants that 500 acres of forest can absorb. On average, 300 American homes can be powered by a 1kW turbine.
  • Noise
    • At a distance of 700-1000 ft, an operating wind farm is no louder than the hum of a refrigerator or a moderately quiet room. Small turbines generally create more noise than the larger ones, because they have a higher rotational speed of the tip. More research money has been devoted to decreasing the noise in larger turbines than in smaller turbines.
Rural night-time background 20-40 dB
Wind farm at 350m 35-45 dB
Car at 40 mph at 100m 55 dB
Busy general office 60 dB
Jet aircraft at 250m 105 dB

db - decibel


  • Bird and Bats
    • The National Audubon Society (NAS) has recently issued a statement that wind turbines are less harmful to bird populations than cars, planes, and other man-made contributions. NAS recently supported the development of responsibly located wind turbines for energy production. According to research in the U.S. And Denmark, the leading country in wind energy production, power lines pose a higher threat to birds than wind turbines. Deaths caused by wind towers and turbines are on the individual level, not population. Places with high mortality rates are routinely investigated.

Newer technology has lowered the mortality rate to bats and birds. The single tower instead of a lattice support or guy wires makes collisions with the pole itself less of an issue in HAWTs. Blades are not required to spin as fast as they were twenty years ago and towers spaced farther apart to lower the risk to the avian population.

Comparison of Power Plants

Wind Energy Natural Gas Pulverized Coal
Project Life (years) 20 (120,000 hours) 30 30
Construction Period (years) 0.5 1 2
Plant Size (MW) 100 500 500
Capacity Factor 25%-30% 23%-57% 80%
Capital Costs ($/kW) $1000 $700-1,200 $1,070–$1,500
Average Operation & Maintenance ($/Mwh) 15 24 20
O&M per kWh $.01-.02 .04
Variable O&M ($/Mwh) 0 2.4 1.6-1.8
Fuel Costs ($/MBtu) 0 1.79-10 1.50

tables of emissions

  • Background
    • The earliest known wind turbine is from Persia, the area now known as Iraq, and were of the vertical axis design. Centuries later, Holland perfected the art of harvesting wind with propeller blades on a rotating axis to face the wind.
    • Windmills are primarily used to gather water or grind grain. Turbines (or modern windmills) are used to harvest electricity. Early grain grinders were straight forward, with the grinding stone attached to the vertical shaft of the windmill.


Retrieved from "https://wiki.cs.earlham.edu/index.php?title=Wind_Poster&oldid=5377"