Difference between revisions of "TrafficCam"
Jump to navigation
Jump to search
Line 26: | Line 26: | ||
* <s>prepare pmp1</s> | * <s>prepare pmp1</s> | ||
* <s>prepare wifi antenna</s> | * <s>prepare wifi antenna</s> | ||
− | * <s>mount cam in enclosure on Dennis roof<s> | + | * <s>mount cam in enclosure on Dennis roof</s> |
* timed charging from 110VAC for cam battery (need a timer) | * timed charging from 110VAC for cam battery (need a timer) | ||
* capture an MPG-4 @ 1 FPS and stream to stewie via pmp1 port80 | * capture an MPG-4 @ 1 FPS and stream to stewie via pmp1 port80 |
Revision as of 13:47, 19 August 2008
Gear to record video of the pedestrian crossing and the speed of Eastbound traffic in front of Earlham on National Road West.
To do (ordered):
- Test-drive current Axis camera "in-situ" on the wind geny's tripod. Use the PMP1 for the interface with the directional WiFi antenna. Location is likely to be the shrubbery near the East side of the entrance.
- Research all-in-one systems, see Alan's email.
- Research discrete speed sensors, pay close attention to the interface and data stream.
Possible technologies:
- Technologic Systems single-board computer
- WiFi interface with directional antenna
- DRS1000 Delta speed sensor
- Axis weatherproof camera - Consider the AXIS 211, http://www.axis.com/products/cam_211/
- POE injector - homebrew with e.g. Linksys vs one with native 12VDC input capability
- Weatherproof case - Consider the AXIS ACH13HB, the datasheet is available at the same URL as the AXIS 211 camera (above) or the AXIS 290B
- Mounting pole
- Step ladder
- Rope
- Power Source
- Large IDE HDD (750GB / 1TB)
Tasks:
upgrade Stewie's HDDstop webcam cron jobsunmount weather cam from roofprepare green pelican caseprepare pmp1prepare wifi antennamount cam in enclosure on Dennis roof- timed charging from 110VAC for cam battery (need a timer)
- capture an MPG-4 @ 1 FPS and stream to stewie via pmp1 port80
- install ipchains on the pmp
- ask for the pmp1's EC WiFi IP to be available from off-campus
- assembly gear
- configure software
- deploy functional traffic cam unit
update cacti hdd monitoringconfigure stewie BIOSdisconnect cam in closetrename new HDD on stewie- port 80 forwarding on pmp
Image volume calculation:
- 60 seconds/minute x 60 minutes/hour x 24 hours/day x 7 days/week x 4.5 weeks/month x 12 months/year = 32,659,200 seconds/year
- 1 frame/second x 20 KB/frame x 32,659,200 seconds/year = 653,184,000 KB/year or 637,875 MB/year or 623 GB/year
Software architecture:
- Cache 2 minutes locally
- Use infobomb stack to transfer and append to current day's movie
- 4a-3:59a movies, sync with infobomb and roll-over, simple trac or fancydir listing by year-month
Questions for Doug:
- Interface - 1 second frames, manual video review, automated video review, speed/video correlation,
- Overall duration, 1 year?
- Better density