Difference between revisions of "Siemens Sentron Pac3200"
Jump to navigation
Jump to search
(→Software Installation) |
(→Stanley Lights / Outlets (120w)) |
||
| Line 3: | Line 3: | ||
===Stanley Lights / Outlets (120w)=== | ===Stanley Lights / Outlets (120w)=== | ||
| − | *It's top one. | + | *It's the top one. |
*MAC: 20-BB-C6-01-13-F3 | *MAC: 20-BB-C6-01-13-F3 | ||
*IP: 159.28.100.66 | *IP: 159.28.100.66 | ||
Revision as of 13:13, 29 March 2015
Contents
Installations
Two are in use in Stanley Hall in room "041 Field Ecology" (SCHLAGE-keyed locks) and subroom "801A Electrical" with the same type of lock.
Stanley Lights / Outlets (120w)
- It's the top one.
- MAC: 20-BB-C6-01-13-F3
- IP: 159.28.100.66
- HOST: power-mon-100066
- Ethernet port: 097
Stanley Industrial (440w)
- It's the bottom one.
- MAC: 20-BB-C6-00-A2-58
- IP: 159.28.100.55
- HOST: power-mon-100055
- Ethernet port: 098
Software Installation
- Download and install Powerconfig from this awful Seimens website
- right click the project and add a PAC3200
- under parameters, do the following:
- change the IP address to one of the IPs above
- change the Gateway to 159.128.100.1
- set Protocol to Modbus TCP
- in the menu click Options -> Activate Online View
- in the menu click Views -> Measurement/Voltage/Current/Power
