HIP:wind: Difference between revisions

From Earlham CS Department
Jump to navigation Jump to search
Copelco (talk | contribs)
Copelco (talk | contribs)
Line 29: Line 29:
* http://www.ofcm.gov/fmh-1/fmh1.htm
* http://www.ofcm.gov/fmh-1/fmh1.htm
* [[http://www.ofcm.gov/fmh-1/pdf/E-CH5.pdf Wind]]
* [[http://www.ofcm.gov/fmh-1/pdf/E-CH5.pdf Wind]]
=== METAR ===
* http://metar.noaa.gov/


=== Calculations ===
=== Calculations ===

Revision as of 15:58, 3 April 2006

Colin will look into how to do damping of the direction and speed readimg.

Placement

  • The international standard for anemometer height above the ground is 10 meters (33 feet) with no obstructions. [2]

Keeping Records

Sampling Standards

  • Mean Wind Speed and Direction: 2-minute mean of speed and direction sampled [2]
  • Wind direction is recorded in degrees from true north [1 19][2 ].

Data Sampling

NWS Spaceflight Meterology Group

Farmland

Indiana State Climate Office

Federal Meteorological Handbook

METAR

Calculations

  • The mode is consisidered the prevailing wind direction. [1 19]
  • Dividing each recording into a north-south and east-west vector, averaging them, and then reassembling the vectors. [1 19]

Sampling Standards

  • Mean Wind Speed and Direction: 2-minute mean of speed and direction sampled before the observation valid time sampled from high-resoluation data (minimum: 5 second instrument polling).
  • Gust: Maximum 'instantaneous' wind value observed in the 10 minutes before the observation time.

Data Sets