Difference between revisions of "Data Collection Howto"

Revision as of 09:30, 8 April 2010

A short description of how to do data collection. You may find it useful to look at these maps. http://cs.earlham.edu/~carrick/courses/cs282/lab6/visualization/viz.php

Update hicompass to the [latest version cs.earlham.edu/~leemasa/robotics/hicompass.py]
Checkout the github repository
- git://github.com/Sleemanmunk/Magnetic-Mapping.git
- more info at [github www.github.com]

Setup

Make sure all the compasses you will be using are connected
- The current plan is to use 4
Make sure that bot_id.py refers to your bot
Start up your program
Follow the on-screen instructions.
- Each compass's ID is written on it in permanent dry-erase marker.
  - The compass IDs don't necessarily match up with their sockets! Look at the board for the mappings or check the wires!
- The rooms are D124 D128 and D129
- Expected values and the details of the coordinate system are on their way.

Running: Repeat the following steps until the entire room is mapped

Place your robot on the center of a tile
- Make sure to keep it facing the same direction!
use the WASD keys to move the abstract coordinates of the box to reflect its new location
press the spacebar and wait for the data collection to complete

When you are finished, press "q" to stop the program.

Put the data file you've created on quark:

$ scp mydatafile.dat myusername@cs.earlham.edu
$ ssh myusername@cs.earlham.edu
$ cp -i mydatafile.dat /tmp/robotics

IMPORTANT: Don't overwrite a file you didn't create!

@@ Line 16: / Line 16: @@
 #Follow the on-screen instructions.
 #*Each compass's ID is written on it in permanent dry-erase marker.
+#**'''The compass IDs don't necessarily match up with their sockets!''' Look at the board for the mappings or check the wires!
+#*The rooms are D124 D128 and D129
 #*Expected values and the details of the coordinate system are on their way.