Difference between revisions of "CS382:Unit-descriptions"
(→Reorganized Unit Descriptions) |
(→Reorganized Unit Descriptions) |
||
Line 4: | Line 4: | ||
* [[cs382:unit-foundation|Foundational Material]] (Charlie) | * [[cs382:unit-foundation|Foundational Material]] (Charlie) | ||
* [[cs382:unit-compsoc|Computational Sociology]] (Nate) | * [[cs382:unit-compsoc|Computational Sociology]] (Nate) | ||
− | * [[cs382:unit-fire|Fire, aka Using a simple dynamic model (Charlie) | + | * [[cs382:unit-fire|Fire]], aka Using a simple dynamic model (Charlie) |
* [[cs382:unit-environmental|Environmental/Climate Modeling]] (Nate) | * [[cs382:unit-environmental|Environmental/Climate Modeling]] (Nate) | ||
* [[cs382:unit-probabilisticmodels|Probabilistic rhythmic model]] (Bryan) | * [[cs382:unit-probabilisticmodels|Probabilistic rhythmic model]] (Bryan) |
Revision as of 09:10, 4 February 2009
Reorganized Unit Descriptions
- Foundational Material (Charlie)
- Computational Sociology (Nate)
- Fire, aka Using a simple dynamic model (Charlie)
- Environmental/Climate Modeling (Nate)
- Probabilistic rhythmic model (Bryan)
- Fermiproblems (Samuel)
- Phylogenetic Trees (Samuel)
- Hurricane Modeling (Ian)
- Possibility: combined labs? (Ian)
- Lightning Modeling(Mikio)
- Engineering Modeling(Dylan)
- Aerodynamics-Airplane/flight modeling (Vlado)
- Traffic Flow (Fitz)
- Your unit goes here (following the above naming convention)
Archived Ideas
- Protein Folding (Charlie)
- More Archived Ideas (All)
Nate
Environmental / ecosystem monitoring. temperature levels / air quality. modelling specific regions vs global modelling
- Talk about pollution, global warming
- Inspired from Second Life, largescale weather-based model - has this been finished??
Pros:
- Relevant and applicable
- Can do something that can't see easily in the real world because too big and too slow
- Could do something with displaying raw data from Netlogo and then work with graphing, stats, or something similar
- Could compare this to a big experiment by one of the national labs or similar - see if your results follow the same trend as the national lab's
Cons:
- Kind of vague, needs more details
- Difficult to see this change in real world, difficult to validate
Comments:
- Existing Netlogo model similar to this (climate change model)
- Nice to find someone else's large scale model and then replicate
Socioeconomic modelling. what happens with changes in legislation eg taxes, min wage. model of population behavior. (agent)
- Computational Sociology (wikipedia)
- brian castellani sociology and complexity web
- Center for Models of Life - CMOL: Models / Interactive Java Applets
Pros:
- Token non-natural science unit, get non-natural sciences students involved
- Touch an emerging field, we can tell people there's a lot to be discovered yet here
- Talk about agent-based modeling
Cons:
- Less numerically-based
- We need to be careful about not stepping on social science's toes
Comments:
- Need to decide on a particular area to go forward with
- Economics is currently very mathematically-based, could do something along these lines
- Could also do something on a smaller scale in class, see a hands on social interaction or how played out
Philip
Chemical modeling - Using resources to model molecules and looking at the kind of molecule a certain combination of atoms make. Goes into using this kind of modeling to make new drugs. Would include a lecture that harks back to an (most likely) earlier lecture about how modeling is the third leg and then go into how drug companies have saved billions of dollars by being able to get through the early phases of drug development with just models. Would have a lab to come up with a feasible possibility for a new type of drug, and what it would/could possibly treat. Need to look into the availability of a computational chem server, as it might not be for use for beyond high school.
- Molecular modelling (wikipedia) This has a whole host of potential softwares to use for this.
- Ghemical homepage This is a software listed on the wiki linked above that I have heard of and have any kind of familiarity with. Though there are certainly many others and it would be a good idea to look at all or most of them in a fair amount of depth before making any decisions as to what software to use.
Pros:
- Maybe able to get the lab or software from Shodor
- Accessible and immediate feedback, understand why would want to do this in the real life
- Hits chemistry (discipline we want to include)
Cons:
- Potentially too complex
- No "numbers", more abstract
- Not immediately comparable to a real world thing, hard to have a real world lab
Comments:
- Walk through making a drug that already exists.
- Find similarities in a drug family
Possibly a more structured/simpler version of the parachute lab done in CS290. Obviously having them perform the parachute drops and such would not be feasible but we could have them start out with the videos and some figures and they would do the netlogo aspect of the lab for themselves. (Different sized parachutes attached to different weights - dropped them and measured them, and then tried to model it and decide how fast different weights should drop with different parachutes.)
Pros:
- Simple enough that they can create their own model, not just look at other people's models
- Important that we have at least one unit where they create their own model
- Lots of math and physics
- Could create own model in Netlogo (or at least adjust a toy model already created)
Cons:
- Physical drops took a very long time to do.
- Would need to be able to some programming on a very basic level if they're going to create their own.
Comments:
- Part of Charlie's "prove gravity" lab?
- Maybe we shouldn't have them create their own model but rather adjust sliders, etc. or at least have most of a toy model made
Bryan
Modeling a woodwind instrument - Could demonstrate how changing the hole positions would affect pitch/timbre. The paper below outlines a technique for modeling the tonehole attempting to account for the half-covered state present in real world performance. Might need some introduction to the physics of music, general properties of waves.
Pros
- Already has some sort of model software to download and look into
- Possible wet lab - making noise with a pringles can or half-filled bottle
- Applicable, something that students would be interested in
Cons
- May possibly be difficult to teach?? general principles of physics, properties of waves (how does it generate sound?)
- No wet lab?
Comments
- Model of airflow in a tube, how the pitch changes when the hole is more or less covered, or located in a different area
- Need to check CSERD/Shodor - May already have some sort of modeling software for this already
- Needs to be something simple - blowing over tube with different levels of liquid in it
- Can we investigate size vs. shape of the capacity and see how this changes it?
Modeling airflow in a wind tunnel - The class could look at the complexity of modeling airflow around a simulated object. How detailed and complex can a virtual object become before modeling airflow around it becomes computationally infeasible? This unit might be able to use some of the physics background introduced in the Woodwind modeling unit described earlier. The fluid dynamics aspect might add a significant learning curve, however.
Pros
- Good example of something very difficult, expensive, timely to do in real life, much easier to do in a simulation
Cons
- Very complicated
Comments
- Only feasible if there's something we could do simple
- Possibly tie into the paper airplane idea
Samuel
Fermiproblems - Use fermiproblems to encourage students to be comfortable making estimates and discovering ways to estimate with only limited data available. Examples are available here: http://iws.ccccd.edu/mbrooks/demos/fermi_questions.htm
- A list of Problems is available here: http://www.physics.umd.edu/perg/fermi/fermi.htm
- Emphasis could be put upon using available sources to find figures as well as how to make estimates where figures are not available
- Problems could be picked which are relevant to the models which the students will later be constructing as a class.
- Students should be taught how to show their reasoning behind extrapolations and to become comfortable with doing so.
- The instructors should have worked through examples showing a complete model and demonstrating which information is necessary for a ballpark estimation and which is not.
Pros
- What makes a good model vs. what makes just a model
Cons
Comments
- Is this included in all of the other units, or also use this and then use these skills in lots of other places
- Include talking about orders of magnitude, scale, significant figures, accuracy vs. precision, pattern recognition
Assembling a phylogenetic tree - Look at models available from the bioinformatics toolbench and experiment with different ways comparing protein similarity. This could be tied into a lecture on protein folding as protein homology like indicative of phylogeny.
Vlado
Aerodynamics of an object:in try of reducing air drag with simulating different versions and simulations of a virtual object in air tunnel; improving it's aerodynamics - in purpose of enabling faster traveling but again trying to keep it safe. Air tunnel simulation basically - how would an object react depending on the material used and its shape/structure? How much does air affect its possible movement? And the direction of the 'blowing' and the movement of the object affects the simulation result. The idea started watching F1 'cars' - which try to use lighter materials so the weight doesn't affect speed, but also to improve very crucial factor - the aerodynamics of the vehicle. Must point out that this model would be based on the physics principles-so its that is the science side of it.
- http://en.wikipedia.org/wiki/Aerodynamics - Wikipedia tells it all about the aerodynamics, one should know. Some ideas about modeling could be obtained.
- http://en.wikipedia.org/wiki/Wind_tunnel - At the lower part of the site - it talks about visualizing the results and the whole simulation of the wind tunnel. Interesting.
- http://www.archiseek.com/content/showthread.php?t=5481 - This link provides multiple links (e.g. http://www.ansys.com/products/cfx.asp Ansys - fluid dynamics) of the software which might be used for modeling such situations described.
- I found another link - which contains some free and simple simulators of some stuff related to airplane modeling - its from NASA and it contains some guides also.
http://www.grc.nasa.gov/WWW/K-12/freesoftware_page.htm
- I have downloaded 3 software's out of the all offered - they're the simulators of different flying situations; from the engine throttle to the air flow around the wing. Might be helpful. Those are:
**EngineSim **EngineSimr **FoilSim
When the files are downloaded; after unpacking them, they contain Java based simulations, which we open in our browser.
** "Make your own Wind Tunnel"
I went through interesting links - depending on what we want to achieve this might help.
http://sln.fi.edu/flights/first/makesimple/index.html
Pros:
- Interesting and hits physics, area we want to include
- Computational fluid dynamics
- Very clearly modeling - trying to see how something will behave on a track or something
Cons:
- Might be difficult to simulate a wind tunnel
Comments:
- Potentially model paper airplanes
- Can build anything they want, very hands on engineering
- Potentially build car models (little cars)
- Real life application: Pringles chips
Mikio
- Lightning - Simulating a thunderstorm, including atmosphere, charged cloud, building on earth and etc. Estimating which area will get damages.
- Fermentation food - Set up food and bacteria (e.g. milk and lactobacillus) and simulate how they get fermented and rotten.
Ian
- Hurricane tracking-- like the data that was shown to CS128, we can have them simulate the paths of hurricanes, severity, etc.
- Tsunami simluation-- similar to the above, except... with tsunamis. [edit: upon further investigation, tsunamis seem less model-able and are more a matter of using sensors and communication systems to detect them and broadcast warnings]
- If we're trying to generate interest, I think it would be good to initially give them huge models of catastrophic events that, to put it crudely, feel "awesome"; Just something to give them the ability to say "Well, WE just simulated a friggin' hurricane that tore across the east coast of the U.S." It might help plug them into the class.
- http://en.wikipedia.org/wiki/Tropical_cyclone_forecast_model (has descriptions of various models for tracking cyclones and hurricanes)
- http://en.wikipedia.org/wiki/Hurricane_Weather_Research_and_Forecasting_model
- http://en.wikipedia.org/wiki/HAZUS
Kay
- Population dynamics, use a predator-prey model and talk about the underlying interaction between two (or more) species. Could do this with agent-based modeling and/or system dynamics modeling. We could talk quite a bit about ecology and species interactions and things that affect the stability.
- Cladistics (constructing a phylogenetic tree). Start with a common protein or gene amongst a group of organisms and construct a model for how they diverged evolutionarily based on evidence from that gene. This could also start simpler with looking at homologies and analogies and constructing a tree based on that (old way), then moving to the more cutting research with the genes. Would give an opportunity to talk about the computing power behind searching large databases of proteins or nucleotides.
Dylan
- I was thinking of doing something with biology. This may be too complicated, given current technology, but if we could take a model of a cell and start playing with it, maybe tweaking a few of the parts, and see if that would have any effect on how that alters the function of the cell in the body?
- Alternately, we could do something with engineering. Develop structual models, and see what sort of crazy structures you could make that would stand on their own. There's already some rudimentary stuff to do this with, such as Bridgebuilder, but if we could possibly do something more complicated, I think that would be awesome.