Difference between revisions of "HIP:TS-7000:DHCP Problems"
Jump to navigation
Jump to search
(→Trying to boot from network?) |
(→Trying to boot from board?) |
||
Line 39: | Line 39: | ||
== Trying to boot from board? == | == Trying to boot from board? == | ||
+ | |||
+ | * filename: ifcfg-eth0 | ||
+ | |||
+ | DEVICE=eth0 | ||
+ | IPADDR=192.168.0.03 | ||
+ | NETMASK=255.255.255.0 | ||
+ | NETWORK=192.168.0.0 | ||
+ | BROADCAST=192.168.0.255 | ||
+ | #BOOTPROTO=static | ||
+ | BOOTPROTO=dhcp | ||
+ | ENABLE=yes | ||
+ | |||
+ | * filename: ifcfg-lo | ||
+ | |||
+ | DEVICE=lo | ||
+ | IPADDR=127.0.0.1 | ||
+ | NETMASK=255.0.0.0 | ||
+ | NETWORK=127.0.0.0 | ||
+ | BROADCAST=127.255.255.255 | ||
+ | ENABLE=yes | ||
+ | BOOTPROTO=static | ||
+ | |||
+ | * filename: network_cfg | ||
+ | |||
+ | ### Technologic Systems | ||
+ | ### General Network Configuration File | ||
+ | ### | ||
+ | NETWORKING=yes | ||
+ | GATEWAY=192.168.0.1 | ||
+ | GW_DEV=eth0 | ||
+ | HOSTNAME="pmp3" | ||
+ | #BOOTPROTO=static | ||
+ | BOOTPROTO=dhcp | ||
+ | DEFRAG_IPV4=no | ||
+ | FORWARD_IPV4=no |
Revision as of 14:21, 3 April 2008
Trying to boot from network?
- Make sure the files in /etc/sysconfig look similar to the ones below;
- filename: ifcfg-eth0
DEVICE=eth0 IPADDR=192.168.0.03 NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 #BOOTPROTO=static BOOTPROTO=dhcp ENABLE=yes
- filename: ifcfg-lo
DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static
- filename: network_cfg
### Technologic Systems ### General Network Configuration File ### NETWORKING=yes GATEWAY=192.168.0.1 GW_DEV=eth0 HOSTNAME="pmp3" #BOOTPROTO=static BOOTPROTO=dhcp DEFRAG_IPV4=no FORWARD_IPV4=no
Trying to boot from board?
- filename: ifcfg-eth0
DEVICE=eth0 IPADDR=192.168.0.03 NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 #BOOTPROTO=static BOOTPROTO=dhcp ENABLE=yes
- filename: ifcfg-lo
DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static
- filename: network_cfg
### Technologic Systems ### General Network Configuration File ### NETWORKING=yes GATEWAY=192.168.0.1 GW_DEV=eth0 HOSTNAME="pmp3" #BOOTPROTO=static BOOTPROTO=dhcp DEFRAG_IPV4=no FORWARD_IPV4=no