HIP:TS-7000:dropbear

about

This page describes how to compile dropbear to run in Technologic System's TS-Linux distribution. We're using the TS-7260.

compiling

crosstool setup

download and setup ts crosstool package

• At the time of this writing, I downloaded Linux Crosstool gcc-4.0.1-glibc-2.3.5 -- unknown (05-20-2006)

ftp://ftp.embeddedarm.com/ts-arm-linux-cd/cross-toolchains/crosstool-linux-gcc-4.0.1-glibc-2.3.5.tar.bz2

move it to / and unpack it

$ cd /
$ sudo tar -xf crosstool-linux-gcc-4.0.1-glibc-2.3.5.tar

add it to your path

$ cat ~/.bash_profile | grep cross
PATH=/opt/crosstool/gcc-4.0.1- glibc-2.3.5/arm-unknown-linux-gnu/bin:${PATH}

dropbear

download dropbear

• [dropbear home]

$ wget http://matt.ucc.asn.au/dropbear/releases/dropbear-0.49.tar.bz2
$ cd dropbear-0.49/

configure make

• dropbear needs access to a good random pool in /dev/random, otherwise it will print this message while running:

Warning: Reading the random source seems to have blocked.
If you experience problems, you probably need to find a better entropy source. 

• for some reason dropbear would always hang on /dev/random, so i edited options.h and changed the random device to be urandom for this error.

#define DROPBEAR_RANDOM_DEV "/dev/urandom"

• the shell script i used to automate the build process

$ cat run.sh

export CFLAGS="-Os -static -Wall"
export LDFLAGS="-static"
./configure --host=arm-unknown-linux-gnu --build=arm --disable-zlib  --disable-syslog
make clean
make PROGRAMS="dropbear dbclient dropbearkey dropbearconvert scp" MULTI=1 STATIC=1

links

• DMP1 SSHD
• Compile Programs
• dropbear netgear