Difference between revisions of "Siemens Sentron Pac3200"
Jump to navigation
Jump to search
(→Software Installation) |
(→Software Installation) |
||
| Line 18: | Line 18: | ||
== Software Installation == | == Software Installation == | ||
| − | #Download and install [http://support.automation.siemens.com/WW/llisapi.dll/63452759?func=ll&objId=63452759&objAction=csView&nodeid0=43500476&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontent&prodLstObjId=33618253 Powerconfig] from this awful Seimens website | + | #Download and install [http://support.automation.siemens.com/WW/llisapi.dll/63452759?func=ll&objId=63452759&objAction=csView&nodeid0=43500476&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontent&prodLstObjId=33618253 Powerconfig] from this awful Seimens website |
#right click the project and add a PAC3200 | #right click the project and add a PAC3200 | ||
#under parameters, do the following: | #under parameters, do the following: | ||
#*change the IP address to one of the IPs above | #*change the IP address to one of the IPs above | ||
| − | #*change the | + | #*change the Gateway to 159.128.100.1 |
#*set Protocol to Modbus TCP | #*set Protocol to Modbus TCP | ||
#in the menu click Options -> Activate Online View | #in the menu click Options -> Activate Online View | ||
Revision as of 12:17, 27 March 2015
Contents
Installations
Two are in use in Stanley Hall in room "041 Field Ecology" (SCHLAGE-keyed locks) and subroom "801A Electrical" with the same type of lock.
Stanley Lights / Outlets (120w)
- It's top one.
- MAC: 20-BB-C6-01-13-F3
- IP: 159.28.100.66
- HOST: power-mon-100066
- Ethernet port: 097
Stanley Industrial (440w)
- It's the bottom one.
- MAC: 20-BB-C6-00-A2-58
- IP: 159.28.100.55
- HOST: power-mon-100055
- Ethernet port: 098
Software Installation
- Download and install Powerconfig from this awful Seimens website
- right click the project and add a PAC3200
- under parameters, do the following:
- change the IP address to one of the IPs above
- change the Gateway to 159.128.100.1
- set Protocol to Modbus TCP
- in the menu click Options -> Activate Online View
- in the menu click Views -> Measurement/Voltage/Current/Power
