Difference between revisions of "Siemens Sentron Pac3200"
Jump to navigation
Jump to search
(→Software Installation) |
|||
| Line 21: | Line 21: | ||
#right click the project and add a PAC3200 | #right click the project and add a PAC3200 | ||
#under parameters, do the following: | #under parameters, do the following: | ||
| − | *change the IP address to one of the IPs above | + | #*change the IP address to one of the IPs above |
| − | *change the gateway to 159.128.100.1 | + | #*change the gateway to 159.128.100.1 |
| − | *set Protocol to Modbus TCP | + | #*set Protocol to Modbus TCP |
#in the menu click Options -> Activate Online View | #in the menu click Options -> Activate Online View | ||
#in the menu click Views -> Measurement/Voltage/Current/Power | #in the menu click Views -> Measurement/Voltage/Current/Power | ||
Revision as of 12:16, 27 March 2015
Contents
Installations
Two are in use in Stanley Hall in room "041 Field Ecology" (SCHLAGE-keyed locks) and subroom "801A Electrical" with the same type of lock.
Stanley Lights / Outlets (120w)
- It's top one.
- MAC: 20-BB-C6-01-13-F3
- IP: 159.28.100.66
- HOST: power-mon-100066
- Ethernet port: 097
Stanley Industrial (440w)
- It's the bottom one.
- MAC: 20-BB-C6-00-A2-58
- IP: 159.28.100.55
- HOST: power-mon-100055
- Ethernet port: 098
Software Installation
- Download and install Powerconfig from this awful Seimens website.
- right click the project and add a PAC3200
- under parameters, do the following:
- change the IP address to one of the IPs above
- change the gateway to 159.128.100.1
- set Protocol to Modbus TCP
- in the menu click Options -> Activate Online View
- in the menu click Views -> Measurement/Voltage/Current/Power
