Difference between revisions of "Siemens Sentron Pac3200"

From Earlham CS Department
Jump to navigation Jump to search
(Stanley industrial (440w))
Line 16: Line 16:
 
*HOST: power-mon-100055
 
*HOST: power-mon-100055
 
*Ethernet port: 098
 
*Ethernet port: 098
 +
 +
== Software Installation ==
 +
#Download and install [http://support.automation.siemens.com/WW/llisapi.dll/63452759?func=ll&objId=63452759&objAction=csView&nodeid0=43500476&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontent&prodLstObjId=33618253 Powerconfig] from this awful Seimens website.
 +
#right click the project and add a PAC3200
 +
#under parameters, do the following:
 +
*change the IP address to one of the IPs above
 +
*change the gateway to 159.128.100.1
 +
*set Protocol to Modbus TCP
 +
#in the menu click Options -> Activate Online View
 +
#in the menu click Views -> Measurement/Voltage/Current/Power
  
 
== Resources ==
 
== Resources ==

Revision as of 12:16, 27 March 2015

Installations

Two are in use in Stanley Hall in room "041 Field Ecology" (SCHLAGE-keyed locks) and subroom "801A Electrical" with the same type of lock.

Stanley Lights / Outlets (120w)

  • It's top one.
  • MAC: 20-BB-C6-01-13-F3
  • IP: 159.28.100.66
  • HOST: power-mon-100066
  • Ethernet port: 097

Stanley Industrial (440w)

  • It's the bottom one.
  • MAC: 20-BB-C6-00-A2-58
  • IP: 159.28.100.55
  • HOST: power-mon-100055
  • Ethernet port: 098

Software Installation

  1. Download and install Powerconfig from this awful Seimens website.
  2. right click the project and add a PAC3200
  3. under parameters, do the following:
  • change the IP address to one of the IPs above
  • change the gateway to 159.128.100.1
  • set Protocol to Modbus TCP
  1. in the menu click Options -> Activate Online View
  2. in the menu click Views -> Measurement/Voltage/Current/Power

Resources

manual

datasheet

modbus registers

Powerconfig v3.2


Modbus