HIP:YSI-650MDS: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (7 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
*How to | [http://www.ierents.com/Manuals/YSI650.PDF 650 MDS Operation Manual] | ||
*How to connect sonde and GPS to 650. | |||
[[Image:Connect_650_with_sonde_gps.jpg]] | [[Image:Connect_650_with_sonde_gps.jpg]] | ||
**To communicate with GPS: | **To communicate with GPS: | ||
***1. In GPS menu, highlight SETUP -> INTERFACE | ***1. In GPS menu, highlight SETUP -> INTERFACE | ||
***2. Set I/O FORMAT: NMEA OUT | ***2. Set I/O FORMAT: NMEA OUT | ||
*How to calibrate sonde using 650 unit? | |||
**(Example of pH) | |||
***1. Connecting 650 to sonde, highlight Sonde menu -> Calibrate -> ISE1 pH -> 1-point | |||
***2. Immerse the sonde in a buffer of known pH value and press Enter | |||
***3. Input the proper pH value for your calibration temperature, and press Enter | |||
**(Example of conductivity) | |||
***1. Highlight sonde menu -> Conductivity -> SpCond | |||
***2. Enther the value of the standard used during calibration | |||
***3. Confirm the calibration | |||
**(Example of Dissolved Oxygen) | |||
***1. Place the sonde in the calibration chamber with the dissolved oxygen probe in water-saturated air | |||
***2. Highlight Sonde menu -> Calibration -> Dissolved Oxygen -> DO% | |||
***3. Enter the current local barometric pressure | |||
***4. Observe the dissolved oxygen reading until stabilization occurs, and confirm | |||
**(Example of ORP) | |||
***1. Highlight Sonde menu -> Calibration -> ISE2 ORP | |||
***2. Immerse the sonde in a solution with a known oxidation reduction potential value | |||
***3. You will be prompted to enter the ORP value of the solution | |||
***4. After stabilization, press Enter to confirm the calibration | |||
*How to harvest data? | |||
**Run sonde from 650. | **Run sonde from 650. | ||
***1. In 650 main menu, highlight Sonde run -> (under 650) start logging | ***1. In 650 main menu, highlight Sonde run -> (under 650) start logging | ||
| Line 13: | Line 36: | ||
*How to update data on PC? | *How to update data on PC? | ||
**1. Connect 650 to stewie in HIP account. | |||
**2. Run EcoWatch, click on the sonde icon in the upper tool bar, and set the Comm port number to match your interface. | |||
**3. Highlight the Upload to PC selection in the 650 File menu and press Enter to view a list of the files. Highlight the file that you wish to transfer and press Enter. | |||
[[Image:Upload data on PC.jpg]] | [[Image:Upload data on PC.jpg]] | ||
*How to convert dat file to csv file? | |||
**1. Open dat file you uploaded on EcoWatch. | |||
**2. Set parameter of the dat file. | |||
***Graphical examples of setting parameter | |||
****[http://1.bp.blogspot.com/_3kd0zP9TXws/SLbTSVtXZwI/AAAAAAAAAV0/-WZTJSN1BDU/s1600-h/Step+1.bmp Open file] | |||
****[http://3.bp.blogspot.com/_3kd0zP9TXws/SLbTSsdo7QI/AAAAAAAAAV8/U0ASiHWf3EU/s1600-h/Step+2.bmp Choose Setup->Parameter->Add/Remove] | |||
****[http://2.bp.blogspot.com/_3kd0zP9TXws/SLbTS6xSCYI/AAAAAAAAAWM/7zWCW-x6CGY/s1600-h/Step+4.bmp Select parameter] | |||
****[http://2.bp.blogspot.com/_3kd0zP9TXws/SLbTTNopQFI/AAAAAAAAAWU/fl37zXV8DeQ/s1600-h/Step+5.bmp Display data] | |||
**3. Choose File -> Export -> CDF/WMF | |||
==YSI650 Case== | |||
[[Image:ysi650_box.jpg]]<br> | |||
[[Image:ysi650_inventory.jpg]]<br> | |||
(1) Sonde | |||
(2) YSI650 | |||
(3) GPS | |||
(4) PC Interface Cable | |||
(5) Field Cable | |||
(6) DE-9 to GPS Cable | |||
(7) 6115 GPS Cable | |||
Latest revision as of 01:17, 27 May 2010
- How to connect sonde and GPS to 650.
- To communicate with GPS:
- 1. In GPS menu, highlight SETUP -> INTERFACE
- 2. Set I/O FORMAT: NMEA OUT
- To communicate with GPS:
- How to calibrate sonde using 650 unit?
- (Example of pH)
- 1. Connecting 650 to sonde, highlight Sonde menu -> Calibrate -> ISE1 pH -> 1-point
- 2. Immerse the sonde in a buffer of known pH value and press Enter
- 3. Input the proper pH value for your calibration temperature, and press Enter
- (Example of conductivity)
- 1. Highlight sonde menu -> Conductivity -> SpCond
- 2. Enther the value of the standard used during calibration
- 3. Confirm the calibration
- (Example of Dissolved Oxygen)
- 1. Place the sonde in the calibration chamber with the dissolved oxygen probe in water-saturated air
- 2. Highlight Sonde menu -> Calibration -> Dissolved Oxygen -> DO%
- 3. Enter the current local barometric pressure
- 4. Observe the dissolved oxygen reading until stabilization occurs, and confirm
- (Example of ORP)
- 1. Highlight Sonde menu -> Calibration -> ISE2 ORP
- 2. Immerse the sonde in a solution with a known oxidation reduction potential value
- 3. You will be prompted to enter the ORP value of the solution
- 4. After stabilization, press Enter to confirm the calibration
- (Example of pH)
- How to harvest data?
- Run sonde from 650.
- 1. In 650 main menu, highlight Sonde run -> (under 650) start logging
- 2. Enter a file name and site description
- 3. 650 starts logging
- 4. When the study is complete, highlight the Stop logging selection and press Enter
- NOTE: You have to log the data to 650 memory, not to sonde memory, because GPS and barometer data cannot be logged to sonde memory.
- Run sonde from 650.
- How to update data on PC?
- 1. Connect 650 to stewie in HIP account.
- 2. Run EcoWatch, click on the sonde icon in the upper tool bar, and set the Comm port number to match your interface.
- 3. Highlight the Upload to PC selection in the 650 File menu and press Enter to view a list of the files. Highlight the file that you wish to transfer and press Enter.
- How to convert dat file to csv file?
- 1. Open dat file you uploaded on EcoWatch.
- 2. Set parameter of the dat file.
- Graphical examples of setting parameter
- 3. Choose File -> Export -> CDF/WMF
YSI650 Case
(1) Sonde
(2) YSI650
(3) GPS
(4) PC Interface Cable
(5) Field Cable
(6) DE-9 to GPS Cable
(7) 6115 GPS Cable