Difference between revisions of "Siemens Sentron Pac3200"
Jump to navigation
Jump to search
(→Software Installation) |
(→Stanley Industrial (440w)) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 13: | Line 13: | ||
*IP: 159.28.26.36, Gateway: 159.28.26.1, Subnet mask 255.255.255.0 | *IP: 159.28.26.36, Gateway: 159.28.26.1, Subnet mask 255.255.255.0 | ||
*HOST: power-mon-100066 | *HOST: power-mon-100066 | ||
| − | *Ethernet port: | + | *Ethernet port: 098 |
===Stanley Industrial (440w)=== | ===Stanley Industrial (440w)=== | ||
| Line 21: | Line 21: | ||
*IP: 159.28.26.33, Gateway: 159.28.26.1, Subnet mask 255.255.255.0 | *IP: 159.28.26.33, Gateway: 159.28.26.1, Subnet mask 255.255.255.0 | ||
*HOST: power-mon-100055 | *HOST: power-mon-100055 | ||
| − | *Ethernet port: | + | *Ethernet port: 097 |
== Software Installation (based on a stale version of powerconfig) == | == Software Installation (based on a stale version of powerconfig) == | ||
Latest revision as of 08:56, 25 March 2017
Contents
Installations
Two are in use in Stanley Hall in room "041 Field Ecology" (SCHLAGE-keyed locks) and subroom "801A Electrical" with the same type of lock.
There are two Siemens Sentron PAC3200 devices, it looks like they both need a firmware upgrade: https://support.industry.siemens.com/cs/document/31674577/firmware-update-pac3200-power-monitoring?dti=0&pnid=19789&lc=en-WW
It looks like the "standard" way to interface to these (and similar) devices is through a MODBUS TCP server/gateway. There are a number of these available including a couple of open-source ones. Reference:
- https://sourceforge.net/projects/easymodbustcp-udp-java/?source=directory
- https://cache.industry.siemens.com/dl/files/442/39848442/att_111157/v1/70373b_76.pdf
Stanley Lights / Outlets (120w)
- It's the top one.
- MAC: 20-BB-C6-01-13-F3
- IP: 159.28.26.36, Gateway: 159.28.26.1, Subnet mask 255.255.255.0
- HOST: power-mon-100066
- Ethernet port: 098
Stanley Industrial (440w)
- It's the bottom one.
- MAC: 20-BB-C6-00-A2-58
- IP: 159.28.26.33, Gateway: 159.28.26.1, Subnet mask 255.255.255.0
- HOST: power-mon-100055
- Ethernet port: 097
Software Installation (based on a stale version of powerconfig)
Required Cable
- Ethernet with Modbus TCP/PROFIBUS DP/RS485 with Modbus RTU
Windows only.
- Download and install Powerconfig from this awful Seimens website
- right click the project and add a PAC3200
- under parameters, do the following:
- change the IP address to one of the IPs above
- change the Gateway to 159.128.100.1
- set Protocol to Modbus TCP
- in the menu click Options -> Activate Online View
- in the menu click Views -> Measurement/Voltage/Current/Power
Resources
Modbus
- A low-level standard for communication between hardware devices.
