HIP:TS-7000:DHCP Problems: Difference between revisions

From Earlham CS Department
Jump to navigation Jump to search
← Older edit
Madunnh (talk | contribs)
345 edits
Madunnh (talk | contribs)
345 edits
 
(4 intermediate revisions by the same user not shown)
Line 6: Line 6:


  DEVICE=eth0
  DEVICE=eth0
  IPADDR=192.168.0.03
  #IPADDR=192.168.0.#
  NETMASK=255.255.255.0
  #NETMASK=255.255.255.0
  NETWORK=192.168.0.0
  #NETWORK=192.168.0.0
  BROADCAST=192.168.0.255
  #BROADCAST=192.168.0.255
  #BOOTPROTO=static
  BOOTPROTO=static
  BOOTPROTO=dhcp
  #BOOTPROTO=dhcp
  ENABLE=yes
  ENABLE=yes
   
   
Line 32: Line 32:
         GATEWAY=192.168.0.1
         GATEWAY=192.168.0.1
         GW_DEV=eth0
         GW_DEV=eth0
         HOSTNAME="pmp3"
         HOSTNAME="hostname"
         #BOOTPROTO=static
         #BOOTPROTO=static
         BOOTPROTO=dhcp
         BOOTPROTO=dhcp
Line 43: Line 43:


  DEVICE=eth0
  DEVICE=eth0
  IPADDR=192.168.0.03
  IPADDR=192.168.0.#
  NETMASK=255.255.255.0
  NETMASK=255.255.255.0
  NETWORK=192.168.0.0
  NETWORK=192.168.0.0
Line 69: Line 69:
         GATEWAY=192.168.0.1
         GATEWAY=192.168.0.1
         GW_DEV=eth0
         GW_DEV=eth0
         HOSTNAME="pmp3"
         HOSTNAME="hostname"
         #BOOTPROTO=static
         #BOOTPROTO=static
         BOOTPROTO=dhcp
         BOOTPROTO=dhcp
         DEFRAG_IPV4=no
         DEFRAG_IPV4=no
         FORWARD_IPV4=no
         FORWARD_IPV4=no

Latest revision as of 19:30, 3 April 2008

Trying to boot from network?

  • Make sure the files in /etc/sysconfig look similar to the ones below;
  • filename: ifcfg-eth0
DEVICE=eth0
#IPADDR=192.168.0.#
#NETMASK=255.255.255.0
#NETWORK=192.168.0.0
#BROADCAST=192.168.0.255
BOOTPROTO=static
#BOOTPROTO=dhcp
ENABLE=yes
  • filename: ifcfg-lo
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
ENABLE=yes
BOOTPROTO=static
  • filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
       NETWORKING=yes
       GATEWAY=192.168.0.1
       GW_DEV=eth0
       HOSTNAME="hostname"
       #BOOTPROTO=static
       BOOTPROTO=dhcp
       DEFRAG_IPV4=no
       FORWARD_IPV4=no

Trying to boot from board?

  • filename: ifcfg-eth0
DEVICE=eth0
IPADDR=192.168.0.#
NETMASK=255.255.255.0
NETWORK=192.168.0.0
BROADCAST=192.168.0.255
#BOOTPROTO=static
BOOTPROTO=dhcp
ENABLE=yes
  • filename: ifcfg-lo
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
ENABLE=yes
BOOTPROTO=static
  • filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
       NETWORKING=yes
       GATEWAY=192.168.0.1
       GW_DEV=eth0
       HOSTNAME="hostname"
       #BOOTPROTO=static
       BOOTPROTO=dhcp
       DEFRAG_IPV4=no
       FORWARD_IPV4=no
Retrieved from "https://wiki.cs.earlham.edu/index.php?title=HIP:TS-7000:DHCP_Problems&oldid=5886"