Difference between revisions of "TrafficCam"

From Earlham CS Department
Jump to navigation Jump to search
Line 27: Line 27:
 
* <s>prepare wifi antenna</s>
 
* <s>prepare wifi antenna</s>
 
* <s>mount cam in enclosure on Dennis roof</s>
 
* <s>mount cam in enclosure on Dennis roof</s>
 +
* <s>update cacti hdd monitoring</s>
 +
* <s>configure stewie BIOS</s>
 +
* <s>disconnect cam in closet</s>
 +
* <s>rename new HDD on stewie</s>
 
* timed charging from 110VAC for cam battery (need a timer)
 
* timed charging from 110VAC for cam battery (need a timer)
 
* capture an MPG-4 @ 1 FPS and stream to stewie via pmp1 port80
 
* capture an MPG-4 @ 1 FPS and stream to stewie via pmp1 port80
Line 34: Line 38:
 
* configure software
 
* configure software
 
* deploy functional traffic cam unit
 
* deploy functional traffic cam unit
* <s>update cacti hdd monitoring</s>
 
* <s>configure stewie BIOS</s>
 
* <s>disconnect cam in closet</s>
 
* <s>rename new HDD on stewie</s>
 
 
* port 80 forwarding on pmp
 
* port 80 forwarding on pmp
  

Revision as of 13:47, 19 August 2008

Gear to record video of the pedestrian crossing and the speed of Eastbound traffic in front of Earlham on National Road West.

To do (ordered):

  • Test-drive current Axis camera "in-situ" on the wind geny's tripod. Use the PMP1 for the interface with the directional WiFi antenna. Location is likely to be the shrubbery near the East side of the entrance.
  • Research all-in-one systems, see Alan's email.
  • Research discrete speed sensors, pay close attention to the interface and data stream.

Possible technologies:

  • Technologic Systems single-board computer
  • WiFi interface with directional antenna
  • DRS1000 Delta speed sensor
  • Axis weatherproof camera - Consider the AXIS 211, http://www.axis.com/products/cam_211/
  • POE injector - homebrew with e.g. Linksys vs one with native 12VDC input capability
  • Weatherproof case - Consider the AXIS ACH13HB, the datasheet is available at the same URL as the AXIS 211 camera (above) or the AXIS 290B
  • Mounting pole
  • Step ladder
  • Rope
  • Power Source
  • Large IDE HDD (750GB / 1TB)

Tasks:

  • upgrade Stewie's HDD
  • stop webcam cron jobs
  • unmount weather cam from roof
  • prepare green pelican case
  • prepare pmp1
  • prepare wifi antenna
  • mount cam in enclosure on Dennis roof
  • update cacti hdd monitoring
  • configure stewie BIOS
  • disconnect cam in closet
  • rename new HDD on stewie
  • timed charging from 110VAC for cam battery (need a timer)
  • capture an MPG-4 @ 1 FPS and stream to stewie via pmp1 port80
  • install ipchains on the pmp
  • ask for the pmp1's EC WiFi IP to be available from off-campus
  • assembly gear
  • configure software
  • deploy functional traffic cam unit
  • port 80 forwarding on pmp


Image volume calculation:

  • 60 seconds/minute x 60 minutes/hour x 24 hours/day x 7 days/week x 4.5 weeks/month x 12 months/year = 32,659,200 seconds/year
  • 1 frame/second x 20 KB/frame x 32,659,200 seconds/year = 653,184,000 KB/year or 637,875 MB/year or 623 GB/year

Software architecture:

  • Cache 2 minutes locally
  • Use infobomb stack to transfer and append to current day's movie
  • 4a-3:59a movies, sync with infobomb and roll-over, simple trac or fancydir listing by year-month

Questions for Doug:

  • Interface - 1 second frames, manual video review, automated video review, speed/video correlation,
  • Overall duration, 1 year?
  • Better density