Difference between revisions of "HIP:TS-7000:DHCP Problems"
Jump to navigation
Jump to search
(→Trying to boot from board?) |
|||
| Line 69: | Line 69: | ||
GATEWAY=192.168.0.1 | GATEWAY=192.168.0.1 | ||
GW_DEV=eth0 | GW_DEV=eth0 | ||
| − | HOSTNAME=" | + | HOSTNAME="hostname" |
#BOOTPROTO=static | #BOOTPROTO=static | ||
BOOTPROTO=dhcp | BOOTPROTO=dhcp | ||
DEFRAG_IPV4=no | DEFRAG_IPV4=no | ||
FORWARD_IPV4=no | FORWARD_IPV4=no | ||
Revision as of 14:23, 3 April 2008
Trying to boot from network?
- Make sure the files in /etc/sysconfig look similar to the ones below;
- filename: ifcfg-eth0
DEVICE=eth0 IPADDR=192.168.0.# NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 #BOOTPROTO=static BOOTPROTO=dhcp ENABLE=yes
- filename: ifcfg-lo
DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static
- filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
NETWORKING=yes
GATEWAY=192.168.0.1
GW_DEV=eth0
HOSTNAME="hostname"
#BOOTPROTO=static
BOOTPROTO=dhcp
DEFRAG_IPV4=no
FORWARD_IPV4=no
Trying to boot from board?
- filename: ifcfg-eth0
DEVICE=eth0 IPADDR=192.168.0.# NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 #BOOTPROTO=static BOOTPROTO=dhcp ENABLE=yes
- filename: ifcfg-lo
DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static
- filename: network_cfg
### Technologic Systems
### General Network Configuration File
###
NETWORKING=yes
GATEWAY=192.168.0.1
GW_DEV=eth0
HOSTNAME="hostname"
#BOOTPROTO=static
BOOTPROTO=dhcp
DEFRAG_IPV4=no
FORWARD_IPV4=no
