ShutdownProcedure

These are the shutdown and boot up instructions for CS and Cluster servers. These page also has the reboot procedure.

Backup Critical wiki pages

There is a script in sysadmin@home.cs.earlham.edu:~/wiki_critical/ called send_wiki.sh that specifies which pages to pull down and send out via email. This is important to do before anyone starts shutting down the machines because the wiki will go offline.

General Info

• babbage should be the very last machine brought down
• to get to sysadmin@smiley first ssh into home or hopper.
• Make sure all virtual machines are shut down before restarting the bare metal hardware

Cluster

Order of shutdowns

1. all compute nodes: (layout, alsalam, whedon) and t-voc, bigfe, elwood
2. all head nodes: (layout, alsalam, whedon)
3. pollock
4. bronte + disk array
5. wait until everything up to this point has shutdown
6. dali
7. kahlo
8. wait until everything up to this point has shutdown
9. hopper

Order to bring up

The reverse of shutdown, again make sure to wait before proceeding at the appropriate steps.

Hadoop

Hadoop runs on whedon and might also need to be restarted manually.

sysadmin@hopper$ ssh w0
sysadmin@w0$ sudo su hadoop
haddop@w0$ cd $HADOOP_HOME
hadoop@w0$ ./sbin/start-all.sh

CS

Shutdown process

If hopper is back online, ssh sysadmin@cluster.cs.earlham.edu and then ssh sysadmin@control.cs.earlham.edu. This way we can shutdown all the VMs directly without being knocked off line or being in the machine room.

Recipe for shutting down a machine on smiley:

ssh sysadmin@tools.cs.earlham.edu
ssh sysadmin@smiley.cs.earlham.edu
sudo su -
smiley-# xl destroy <hostname>.cs.earlham.edu

List running VMs

smiley-# xl list

Order of shutdowns

1. proto (lives seperatly, ssh admin@proto.cs.earlham.edu)
2. tools
3. web
4. net
5. smiley (tools, web, net are VM's run on smiley's hardware)
6. babbage (firewall)

• Make sure all virtual machines are shut down before restarting the bare metal hardware*

Ideally the VM's should be shutdown from inside (by ssh'ing into them and running shutdown). After that, run "xl list" to see if they're still listed as domains, then run the "xl destroy" commands as needed.

# xl destroy tools.cs.earlham.edu
# xl destroy web.cs.earlham.edu
# xl destroy net.cs.earlham.edu

Start up again

Mounting Logical Volumes

When you reboot, the LVM volume groups and logical volumes may not be automatically enabled. To bring them back do

console-# lvscan
console-# vgscan
console-# vgchange -a y

This should be done at boot using /etc/init.d/rc.sysinit but there still might be some subtleties there.

Starting VMs

The VMs on smiley should be brought up in the reverse order they were shutdown.

It is important to bring up net first because it runs DNS, DHCP, and LDAP.

smiley-# xl create -c ~sysadmin/xen-configs/eccs-<hostname>.cfg
# To exit to the hypervisor shell you can press Ctrl + ]

To start them up without going into the console:

# xl create ~sysadmin/xen-configs/eccs-<hostname>.cfg

Connect to VM console after the VM is running:

smiley-# xl console <hostname>.cs.earlham.edu

The different VMs mount from eachother, so just be patient and hopefully everything will work out.

Tools

We may have to restart nginx, jupyter, and sage by hand. Using history | grep <command> is helpful here. (make sure to grab the entire command including ampersand)

Jupyter

eccs-tools# nohup su -c "/mnt/lovelace/software/anaconda/envs/py35/bin/jupyterhub -f /etc/jupyterhub/jupyterhub_config.py --no-ssl" &

Sage

eccs-tools# nohup /home/sage/sage-6.8/sage --notebook=sagenb accounts=False automatic_login=False interface= port=8080 &

Troubleshooting

If things aren't going well, it's possible to start the VMs in a pseudo single-user mode:

xm create -c eccs-home.cfg extra="init=/bin/bash" # start and leave it in single user mode with the console
(from within the vm)
mount -o remount,rw /
service networking start # ignore the upstart errors
mount /eccs/users
mount /eccs/clients
mount /mnt/lovelace/software

If you exit that shell the kernel will panic, if you leave it with ^] it seems to stay stable.