Difference between revisions of "Galileo"
(→info dump) |
|||
| Line 11: | Line 11: | ||
Always connect the power first. | Always connect the power first. | ||
| + | |||
| + | There are example sketches for every sensor included in Intel's sensor kit. Where? Good question. | ||
| + | |||
| + | Costs $60+ as of 2/5/14. Purchase is currently cheapest [[http://www.microcenter.com/product/424730/Galileo_Development_Board Micro Center]] and [[http://www.amazon.com/gp/product/B00GGM6KJQ/ref=amb_link_391457722_3?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=auto-sparkle&pf_rd_r=0YETJYR48ZGF8VHYN4E5&pf_rd_t=301&pf_rd_p=1665886302&pf_rd_i=intel%20galileo Amazon]]. | ||
=Resources= | =Resources= | ||
| Line 32: | Line 36: | ||
* Galileo board | * Galileo board | ||
* power adapter | * power adapter | ||
| − | * micro SD card | + | * micro SD card (formatted as FAT or FAT32) |
* micro usb male -> RS32 female | * micro usb male -> RS32 female | ||
* RS32 male -> usb male | * RS32 male -> usb male | ||
| Line 55: | Line 59: | ||
Drivers | Drivers | ||
| − | # in device manager (or equivalent) find | + | # in device manager (or equivalent) find "Gadget Serial V2.4" and install the drivers from "arduino-1.5.3/hardware/arduino/x86/tools" |
# note the COM port of the device [specify] | # note the COM port of the device [specify] | ||
| Line 73: | Line 77: | ||
Testing Galileo's Arduino | Testing Galileo's Arduino | ||
| − | # | + | # try running the "blink" sketch in the Arduino IDE from file -> examples -> 1. Basics -> Blink |
| + | # upload sketch to the board | ||
# the LED nearest the audio jack should light up | # the LED nearest the audio jack should light up | ||
Revision as of 22:37, 5 February 2014
The Galileo is a fusion of a Linux PC running Intel's architecture and an Arduino. The purpose is to provide the benefits of a pc (connectivity, power, storage, ports) with the benefits of an Arduino (an open-platform hardware interface.)
This page specifically discusses the Galileo. Anything Arduino-specific should get relegated to here.
info dump
IoTkit handles ethernet transactions. It connects to a host and sends a packet with [string, val] where val is the value you wish to send. You can save information locally and push it to a server later. A watch battery can be used to preserve machine state between power-on's. [validate]
There are no packages installed on Intel's Linux distro.
There's an interface for C++ that lets you access the Arduino.
Always connect the power first.
There are example sketches for every sensor included in Intel's sensor kit. Where? Good question.
Costs $60+ as of 2/5/14. Purchase is currently cheapest [Micro Center] and [Amazon].
Resources
Downloads
[Drivers]
Installation
Materials
- Galileo board
- power adapter
- micro SD card (formatted as FAT or FAT32)
- micro usb male -> RS32 female
- RS32 male -> usb male
Downloads
- [Getting Started 005]
- [BSP Build Guide 001]
- go [here] and download "Intel Galileo Arduino SW 1.5.3" and "LINUX IMAGE FOR SD for Intel Galileo"
Cables
- plug power into Galileo (always do this first)
- join the female and male RS32
- connect Galileo to the PC
Arduino
- extract "Intel Galileo Arduino SW 1.5.3"
- open the executable for Arduino 1.5.3
- change board to Galileo if necessary
- update the firmware via help -> firmware update
- wait, this might take a few minutes (the window will say when it's finished)
Drivers
- in device manager (or equivalent) find "Gadget Serial V2.4" and install the drivers from "arduino-1.5.3/hardware/arduino/x86/tools"
- note the COM port of the device [specify]
Serial Connection
- get [Putty] (or equivalent)
- open Putty (or equivalent)
- change the connection type to serial, speed to 115200, and the serial line to your specified COM port
- save the settings and click the open button
- wait, this might take a few minutes (it's finished when the command [specify] is present and nothing is happening)
- log in as root; by default it has no password
- extract[the linux image] to the micro SD card
- close your putty
- put the micro SD card into the Galileo
- remove both cables from the Galileo and wait a few seconds
- replace the power cable then the usb cable
- open putty again and reestablish the connection
Testing Galileo's Arduino
- try running the "blink" sketch in the Arduino IDE from file -> examples -> 1. Basics -> Blink
- upload sketch to the board
- the LED nearest the audio jack should light up
Specs
- 400mhz cpu
- 256mb ram
- 32gb micro sd
- 10/100 ethernet
- PCI Express mini-card with PCIe 2.0
- USB host and device
- 5v/3.3v power
- same Arduino pin layout
